DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

FP1189-PCB-1900 View Datasheet(PDF) - WJ Communications => Triquint

Part Name
Description
Manufacturer
FP1189-PCB-1900
WJ
WJ Communications => Triquint WJ
FP1189-PCB-1900 Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
FP1189
½-Watt HFET
The Communications Edge TM
Product Information
Product Features
50 – 4000 MHz
+27 dBm P1dB
+40 dBm Output IP3
High Drain Efficiency
20.5 dB Gain @ 900 MHz
Lead-free/Green/RoHS-
compliant SOT-89 Package
MTTF >100 Years
Applications
Mobile Infrastructure
CATV / DBS
W-LAN / ISM
RFID
Defense / Homeland Security
Fixed Wireless
Product Description
The FP1189 is a high performance ½-Watt HFET
(Heterostructure FET) in a low-cost SOT-89 surface-
mount package. This device works optimally at a drain
bias of +8 V and 125 mA to achieve +40 dBm output IP3
performance and an output power of +27 dBm at 1-dB
compression, while providing 20.5 dB gain at 900 MHz.
The device conforms to WJ Communications’ long history
of producing high reliability and quality components. The
FP1189 has an associated MTTF of greater than 100 years
at a mounting temperature of 85 °C and is available in both
the standard SOT-89 package and the environmentally-
friendly lead-free/green/RoHS-compliant and green SOT-
89 package. All devices are 100% RF & DC tested.
The product is targeted for use as driver amplifiers for
wireless infrastructure where high performance and high
efficiency are required.
Functional Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input / Gate
Output / Drain
Ground
Pin No.
1
3
2, 4
Specifications
DC Parameter
Saturated Drain Current, Idss (1)
Transconductance, Gm
Pinch Off Voltage, Vp (2)
Units
mA
mS
V
Min
220
Typ
290
155
-2.1
Max
360
RF Parameter (3)
Operational Bandwidth
Test Frequency
Small Signal Gain
SS Gain (50 , unmatched)
Maximum Stable Gain
Output P1dB
Output IP3 (4)
Noise Figure
Drain Bias
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
Min Typ Max
50
4000
800
20.5
17
21
24
+27.4
+40
2.7
+8 V @ 125 mA
1. Idss is measured with Vgs = 0 V, Vds = 3 V.
2. Pinch-off voltage is measured when Ids = 1.2 mA.
3. Test conditions unless otherwise noted: T = 25ºC, VDS = 8 V, IDQ = 125 mA, in a tuned application
circuit with ZL = ZLOPT, ZS = ZSOPT (optimized for output power).
4. 3OIP measured with two tones at an output power of +12 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance (5)
Parameter
Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 (4)
Noise Figure
IS-95 Channel Power
@ -45 dBc ACPR
W-CDMA Ch. Power
@ -45 dBc ACLR
Drain Voltage
Drain Current
Units
MHz
dB
dB
dB
dBm
dBm
dB
dBm
V
mA
915
20.6
13
6.0
+27.4
+39.9
2.7
Typical
1960 2140
15.7 14.7
26 24
9.6 9.0
+27.2 +27.2
+40.4 +39.7
3.7 4.3
2450
13.2
36
7.6
+28.1
+40.0
+21 +20.8
+18.4
+8
125
5. Typical parameters represent performance in a tuned application circuit.
Absolute Maximum Rating
Parameter
Rating
Operating Case Temperature
-40 to +85 °C
Storage Temperature
-55 to +150 °C
DC Power
2.0 W
RF Input Power (continuous)
6 dB above Input P1dB
Drain to Gate Voltage, Vdg
Junction Temperature
+16 V
+220 °C
Operation of this device above any of these parameters may cause permanent damage.
Ordering Information
Part No.
FP1189-G
FP1189-PCB900S
FP1189-PCB1900S
FP1189-PCB2140S
Description
½ -Watt HFET
(lead-free/green/RoHS-compliant SOT-89 package)
870 – 960 MHz Application Circuit
1930 – 1990 MHz Application Circuit
2110 – 2170 MHz Application Circuit
Specifications and information are subject to change without notice.
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 1 of 11 October 2006
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]