M29W800DT, M29W800DB
10 Revision history
Revision history
Table 29. Document revision history
Date
Version
Changes
August 2001 1.0 First issue
03-Dec-2001
Block protection appendix added, SO44 drawing and package
2.0 mechanical data updated, CFI Table 26, address 39h/72h data clarified,
read/reset operation during erase suspend clarified
01-Mar-2002
Description of Ready/Busy signal clarified (and Figure 14 modified)
3.0 Clarified allowable commands during block erase
Clarified the mode the device returns to in the CFI Read Query
command section
11-Apr-2002
Temperature range 1 added
4.0
Document promoted from preliminary data to full datasheet
31-Mar-2003
13-Feb-2004
23-Apr-2004
Erase suspend latency time (typical and maximum) and data retention
parameters added to Table 6: Program, erase times and program, erase
endurance cycles, and typical after 100k W/E cycles column removed.
Minimum voltage corrected for 70 ns speed class in Table 9: Operating
4.1 and AC measurement conditions.
Logic diagram and data toggle flowchart corrected.
Lead-free package options E and F added to Table 19: Ordering
information scheme.
TSOP48 package outline and mechanical data updated.
5
TFBGA48 6 x 8 mm – 6 x 8 active ball array – 0.80 mm pitch added.
Table 9: Operating and AC measurement conditions updated for 70 ns
speed option.
6 Figure 2: SO connections updated.
16-Sep-2004
7 45 ns speed class added.
21-Mar-2006
8
Removed TFBGA48 (ZA) (6 x 9 mm) package. Converted to new ST
corporate template.
10-Dec-2007
9 Applied Numonyx branding.
25-Mar-2008 10 Minor text changes.
51/52