Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

M24C32FCS5TA View Datasheet(PDF) - STMicroelectronics

Part NameDescriptionManufacturer
M24C32FCS5TA 128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ST-Microelectronics
STMicroelectronics ST-Microelectronics
M24C32FCS5TA Datasheet PDF : 39 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
M24128, M24C64, M24C32
5
Initial delivery state
Initial delivery state
The device is delivered with all bits in the memory array set to 1 (each byte contains FFh).
6
Maximum rating
Stressing the device outside the ratings listed in Table 7 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability. Refer also to the STMicroelectronics SURE Program and other relevant
quality documents.
Table 7. Absolute maximum ratings
Symbol
Parameter
Min. Max. Unit
TA
TSTG
TLEAD
Ambient operating temperature
Storage temperature
Lead temperature during soldering
PDIP-specific lead temperature during soldering
–40
130
°C
–65
150
°C
see note (1)
°C
260(2)
°C
VIO
Input or output range
–0.50
6.5
V
IOL
DC output current (SDA = 0)
-
5
mA
VCC
Supply voltage
–0.50
6.5
V
VESD
Electrostatic discharge voltage (human body model)(3) –4000 4000
V
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. TLEAD max must not be applied for more than 10 s.
3. AEC-Q100-002 (compliant with JEDEC Std JESD22-A114A, C1=100pF, R1=1500 Ω, R2=500 Ω)
21/39
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]