M16C/64C View Datasheet(PDF) - Renesas Electronics

Part Name

Description

Manufacturer

M16C/64C

SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Renesas Electronics 

M16C/64C Group

1. Overview

Table 1.2 Specifications for the 100-Pin Package (2/2)

Item

Function

Description

Timer A

16-bit timer × 5

Timer mode, event counter mode, one-shot timer mode, pulse width

modulation (PWM) mode

Event counter two-phase pulse signal processing (two-phase encoder

input) × 3

Programmable output mode × 3

Timer B

16-bit timer × 6

Timer mode, event counter mode, pulse period measurement mode,

pulse width measurement mode

Timers

Three-phase motor control

timer functions

• Three-phase inverter control (timer A1, timer A2, timer A4, timer B2)

• On-chip dead time timer

Real-time clock

Count: seconds, minutes, hours, days of the week

PWM function

8 bits × 2

Remote control signal receiver

• 2 circuits

• 4 wave pattern matchings (differentiate wave pattern for headers, data

0, data 1, and special data)

• 6-byte receive buffer (1 circuit only)

• Operating frequency of 32 kHz

Serial

Interface

UART0 to UART2, UART5 to

UART7

Clock synchronous/asynchronous × 6 channels

I2C-bus, IEBus, special mode 2

SIM (UART2)

SI/O3, SI/O4

Clock synchronization only × 2 channels

Multi-master I2C-bus Interface

1 channel

CEC Functions (2)

CEC transmit/receive, arbitration lost detection, ACK automatic output,

operation frequency of 32 kHz

A/D Converter

10-bit resolution × 26 channels, including sample and hold function

Conversion time: 1.72 µs

D/A Converter

8-bit resolution × 2 circuits

CRC Calculator

CRC-CCITT (X16 + X12 + X5 + 1),

CRC-16 (X16 + X15 + X2 + 1) compliant

Flash Memory

• Program and erase power supply voltage: 2.7 to 5.5 V

• Program and erase cycles: 1,000 times (program ROM 1, program

ROM 2), 10,000 times (data flash)

• Program security: ROM code protect, ID code check

Debug Functions

On-chip debug, on-board flash rewrite, address match interrupt × 4

Operation Frequency/Supply Voltage

25 MHz/VCC1 = 2.7 to 5.5 V, VCC2 = 2.7 V to VCC1

Current Consumption

Refer to the Electrical Characteristics chapter

Operating Temperature

-20°C to 85°C, -40°C to 85°C (1)

Package

100-pin QFP: PRQP0100JD-B (Previous package code: 100P6F-A)

100-pin LQFP: PLQP0100KB-A (Previous package code: 100P6Q-A)

Notes:

1. See Table 1.3 “Product List (N-Version)” and Table 1.4 “Product List (D-Version)” for the operating temperature.

2. The CEC function indicates circuitry which supports the transmission and reception of CEC signals standardized

by the High-Definition Multimedia Interface (HDMI). HDMI and High-Definition Multimedia Interface are

registered trademarks of HDMI Licensing, LLC.

R01DS0016EJ0100 Rev.1.00

Feb 07, 2011

Page 3 of 88

Share Link: