M16C62P View Datasheet(PDF) - Renesas Electronics

Part Name

Description

Manufacturer

M16C62P

SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Renesas Electronics 

M16C/62P Group (M16C/62P, M16C/62PT)

1. Overview

Table 1.2 Performance Outline of M16C/62P Group (M16C/62P, M16C/62PT)(100-pin version)

Item

Performance

M16C/62P

M16C/62PT(4)

CPU

Number of Basic Instructions 91 instructions

Minimum Instruction

Execution Time

41.7ns(f(BCLK)=24MHz, VCC1=3.3 to 5.5V) 41.7ns(f(BCLK)=24MHz, VCC1=4.0 to 5.5V)

100ns(f(BCLK)=10MHz, VCC1=2.7 to 5.5V)

Operating Mode

Single-chip, memory expansion

and microprocessor mode

Single-chip

Address Space

1 Mbyte (Available to 4 Mbytes by 1 Mbyte

memory space expansion function)

Memory Capacity

See Table 1.4 to 1.7 Product List

Peripheral

Function

Port

Multifunction Timer

Input/Output : 87 pins, Input : 1 pin

Timer A : 16 bits x 5 channels, Timer B : 16 bits x 6 channels,

Three phase motor control circuit

Serial Interface

3 channels

Clock synchronous, UART, I2C bus(1), IEBus(2)

2 channels

Clock synchronous

A/D Converter

10-bit A/D converter: 1 circuit, 26 channels

D/A Converter

8 bits x 2 channels

DMAC

2 channels

CRC Calculation Circuit CCITT-CRC

Watchdog Timer

15 bits x 1 channel (with prescaler)

Interrupt

Internal: 29 sources, External: 8 sources, Software: 4 sources, Priority level: 7 levels

Clock Generation Circuit 4 circuits

Main clock generation circuit (*), Subclock generation circuit (*),

On-chip oscillator, PLL synthesizer

(*)Equipped with a built-in feedback resistor.

Oscillation Stop

Detection Function

Stop detection of main clock oscillation, re-oscillation detection function

Voltage Detection Circuit Available (option (5))

Absent

Electric

Supply Voltage

Characteristics

VCC1=3.0 to 5.5 V, VCC2=2.7V to

VCC1 (f(BCLK=24MHz)

VCC1=2.7 to 5.5 V, VCC2=2.7V to

VCC1 (f(BCLK=10MHz)

VCC1=VCC2=4.0 to 5.5V

(f(BCLK=24MHz)

Power Consumption

14 mA (VCC1=VCC2=5V, f(BCLK)=24MHz)

8 mA (VCC1=VCC2=3V, f(BCLK)=10MHz)

1.8µA (VCC1=VCC2=3V, f(XCIN)=32kHz,

wait mode)

0.7µA (VCC1=VCC2=3V, stop mode)

14 mA (VCC1=VCC2=5V, f(BCLK)=24MHz)

2.0µA (VCC1=VCC2=5V, f(XCIN)=32kHz,

wait mode)

0.8µA (VCC1=VCC2=5V, stop mode)

Flash memory

version

Program/Erase Supply Voltage 3.3±0.3 V or 5.0±0.5 V

5.0±0.5 V

Program and Erase

Endurance

100 times (all area)

or 1,000 times (user ROM area without block A and block 1)

/ 10,000 times (block A, block 1) (3)

Operating Ambient Temperature

-20 to 85°C,

-40 to 85°C (3)

T version : -40 to 85°C

V version : -40 to 125°C

Package

100-pin plastic mold QFP, LQFP

NOTES:

1. I2C bus is a registered trademark of Koninklijke Philips Electronics N. V.

2. IEBus is a registered trademark of NEC Electronics Corporation.

3. See Table 1.8 and 1.9 Product Code for the program and erase endurance, and operating ambient

temperature.

In addition 1,000 times/10,000 times are under development as of Jul., 2005. Please inquire about a release

schedule.

4. Use the M16C/62PT on VCC1=VCC2

5. All options are on request basis.

Rev.2.41 Jan 10, 2006 Page 3 of 390

REJ09B0185-0241

Share Link: