LPC1751 View Datasheet(PDF) - Philips Electronics

Part Name

Description

Manufacturer

LPC1751

32-bit ARM Cortex-M3 MCU; up to 512 kB flash and 64 kB SRAM with Ethernet, USB 2.0 Host/Device/OTG, CAN

Philips Electronics 

NXP Semiconductors

LPC1759/58/56/54/52/51

32-bit ARM Cortex-M3 microcontroller

7.13.1 Features

• One or two CAN controllers and buses.

• Data rates to 1 Mbit/s on each bus.

• 32-bit register and RAM access.

• Compatible with CAN specification 2.0B, ISO 11898-1.

• Global Acceptance Filter recognizes standard (11-bit) and extended-frame (29-bit)

receive identifiers for all CAN buses.

• Acceptance Filter can provide FullCAN-style automatic reception for selected

Standard Identifiers.

• FullCAN messages can generate interrupts.

7.14 12-bit ADC

The LPC1759/58/56/54/52/51 contain one ADC. It is a single 12-bit successive

approximation ADC with six channels and DMA support.

7.14.1 Features

• 12-bit successive approximation ADC.

• Input multiplexing among 6 pins.

• Power-down mode.

• Measurement range VREFN to VREFP.

• 12-bit conversion rate: 200 kHz.

• Individual channels can be selected for conversion.

• Burst conversion mode for single or multiple inputs.

• Optional conversion on transition of input pin or Timer Match signal.

• Individual result registers for each ADC channel to reduce interrupt overhead.

• DMA support.

7.15 10-bit DAC (LPC1759/58/56/54 only)

The DAC allows to generate a variable analog output. The maximum output value of the

DAC is VREFP.

7.15.1 Features

• 10-bit DAC

• Resistor string architecture

• Buffered output

• Power-down mode

• Selectable output drive

• Dedicated conversion timer

• DMA support

LPC1759_58_56_54_52_51_4

Product data sheet

Rev. 04 — 26 January 2010

© NXP B.V. 2010. All rights reserved.

21 of 64

Share Link: