DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ML2037 View Datasheet(PDF) - Micro Linear Corporation

Part Name
Description
Manufacturer
ML2037 Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
ML2037
PIN CONFIGURATION
ML2037
16-Pin PDIP (P16)
16-Pin Wide SOIC (S16W)
D GND 1
SYNC 2
16 DVCC
15 G1
CLK OUT 3
14 G0
S CLK 4
13 CLK IN
D GND 5
S DATA IN 6
S ENABLE 7
12 AVCC
11 AVCC
10 OUT
SHDN 8
9 A GND
TOP VIEW
PIN DESCRIPTION
PIN NAME
1, 5 D GND
FUNCTION
Ground connection for the digital
sections of the IC.
2 SYNC
Synchronization input. Holding this
pin low stops the sine wave output,
and resets the phase to zero.
3 CLK OUT Output of the internal high frequency
clock generator. fCLK OUT = ½fCLK IN.
4 S CLK
Serial data clock input. Serial data is
clocked into the shift register on
falling edges of S CLK.
6 S DATA IN Serial data input for programming the
output frequency.
7 S ENABLE Serial interface enable control. A
logic high on this pin allows data to be
entered into the latch.
8 SHDN
A logic high on this pin causes the
output of the generator to shut off and
places the IC in a low power standby
mode.
PIN NAME
9 A GND
10 OUT
11,12 AVCC
13 CLK IN
14 G0
15 G1
16 DVCC
FUNCTION
Ground reference for analog sections
of the IC and reference for OUT.
Sine wave output. The amplitude of
the sine wave will vary around a 2.5V
DC level.
Power supply for the analog sections of
the IC.
Input of the internal high frequency
clock generator. This pin is either
driven from an external clock input or
connected to a crystal for use with the
internal oscillator.
Output gain control. Works with G1 to
set the output amplitude to one of four
different full scale ranges.
Output gain control. Works with G0 to
set the output amplitude to one of four
different full scale ranges.
Power supply for the digital sections of
the IC.
2
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]