Electrical Characteristics (Continued)
Over recommended operating supply and temperature ranges unless otherwise specified C1 = C2 = C3 = C4 = Cbp = 0.1µF
Receiver Propagation Delay CL = 150pF
RL = 3kΩ, CL = 2500pF
All transmitters loaded
Transition Region Slew Rate TA = 25˚C, VS = 5V
CL = 50pF to 1000pF, RL = 3kΩ to 7kΩ
Measured from +3V to −3V or vice versa
ESD Performance: Transmitter Outputs and Receiver Inputs
Human Body Model
IEC 1000-4-2, Contact
IEC 1000-4-2, Air-gap
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 2: Human Body Model, 1.5kΩ in series with 100pF
Note 3: The maximum power dissipation is a function of TJ(MAX), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD =
(TJ(MAX) − TA)/ θJA. All numbers apply for packages soldered directly onto a PC board.
Note 4: Typical Values represent the most likely parametric norm.
Note 5: All limits are guaranteed by testing or statistical analysis
Note 6: Machine model, 0Ω in series with 200pF
Note 7: IEC 1000-4-2, 330Ω in series with 150pF
Note 8: ESD rating applies to pins 7,8 13 and 14
Note 9: ESD rating applies to pins 1, 2, 3, 4, 5, 6, 9, 10, 11, 12, 15 and 16