Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


LM2748MTC View Datasheet(PDF) - National ->Texas Instruments

Part NameLM2748MTC National-Semiconductor
National ->Texas Instruments National-Semiconductor
DescriptionSynchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
LM2748MTC Datasheet PDF : 23 Pages
First Prev 21 22 23
Physical Dimensions inches (millimeters) unless otherwise noted
TSSOP-14 Pin Package
NS Package Number MTC14
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
National Semiconductor
Americas Customer
Support Center
Email: new.feedback@nsc.com
Tel: 1-800-272-9959
www.national.com
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Support Center
Email: ap.support@nsc.com
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
Direct download click here
HOME 'LM2748MTC' Search

DESCRIPTION
The LM2745/8 are high-speed synchronous buck regulator controllers with an accurate feedback voltage accuracy of ±1.5%. It can provide simple down conversion to output voltages as low as 0.6V. Though the control sections of the IC are rated for 3 to 6V, the driver sections are designed to accept input supply rails as high as 14V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.
The LM2745/8 features a fixed-frequency voltage-mode PWM control architecture which is adjustable from 50 kHz to 1 MHz with one external resistor. In addition, the LM2745 also allows the switching frequency to be synchronized to an external clock signal over the range of 250 kHz to 1 MHz. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.

FEATURES
• Switching Frequency from 50 kHz to 1 MHz
• Switching Frequency Synchronize Range 250 kHz to 1 MHz (LM2745 Only)
• Startup with a Pre-biased Output Load
• Power Stage Input Voltage from 1V to 14V
• Control Stage Input Voltage from 3V to 6V
• Output Voltage Adjustable Down to 0.6V
• Power Good Flag and Shutdown
• Output Overvoltage and Undervoltage Detection
• ±1.5% Feedback Voltage Accuracy Over Temperature
• Low-side Adjustable Current Sensing
• Adjustable Soft-start
• Tracking and Sequencing with Shutdown and Soft Start Pins
• TSSOP-14 Package

APPLICATIONS
• Down Conversion from 3.3V
• Cable Modem, DSL and ADSL
• Laser Jet and Ink Jet Printers
• Low Voltage Power Modules
• DSP, ASIC, Core and I/O

Share Link : 
한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]