Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

E-L4973V3.3 View Datasheet(PDF) - STMicroelectronics

Part NameDescriptionManufacturer
E-L4973V3.3 3.5A step down switching regulator ST-Microelectronics
STMicroelectronics ST-Microelectronics
E-L4973V3.3 Datasheet PDF : 27 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Pin settings
L4973
2.2
Pin description
Table 1. Pin description
N° Pin
DIP-18
SO-20
11
12
10
11
9
10
18
20
7,8
8,9
2,3
2,3
12
13
16
4,5,6
13,14,15
18
4,5,6,7
14,15,16,17
1
1
Name
Description
COMP
INH
BOOT
SYNC
VCC
OUT
VFB
V5.1
E/A output to be used for frequency compensation
A logic signal (active high) disables the device (sleep
mode operation). If not used it must be connected to
GND; if floating the device is disabled.
A capacitor connected between this pin and the output
allows to drive the internal D-MOS.
Input/Output synchronization.
Unregulated DC input voltage
Stepdown regulator output.
Stepdown feedback input. Connecting the output
directly to this pin results in an output voltage of 3.3V for
the L4973V3.3 and 5.1V for L4973V5.1. An external
resistive divider is required for higher output voltages.
For output voltage resistive divider is required for higher
output voltages. For output voltage less than 3.3V, see
Note: 1 and Figure 33.
Reference voltage externally available.
GND Signal ground
OSC
An external resistor connected between the unregulated
input voltage and Pin 1 and a capacitor connected from
Pin 1 to ground fixes the switching frequency. (Line feed
forward is automatically obtained)
Note: 1 The maximum power dissipation of the package must be observed.
4/27
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]