ST95010WB3TR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST95010WB3TR

4K/2K/1K Serial SPI EEPROM with Positive Clock Strobe

STMicroelectronics 

Figure 5. Block Diagram

ST95040, ST95020, ST95010

HOLD

W

S

C

D

Q

Control Logic

High Voltage

Generator

I/O Shift Register

Address Register

and Counter

Data

Register

Status

Block

Protect

16 Bytes

X Decoder

AI01272

During a write to the memory operation to the

memory array, all bits BP1, BP0, WEL, WIP are

valid and can be read. During a write to the status

register, only the bits WEL and WIP are valid and

can be read. The values of BP1 and BP0 read at

that time correspond to the previous contents of the

status register.

The Write-In-Process (WIP) read-only bit indicates

whether the Memory is busy with a write operation.

When set to a ’1’ a write is in progress, when set to

a ’0’ no write is in progress.

The Write Enable Latch (WEL) read-only bit indi-

cates the status of the write enable latch. When set

to a ’1’ the latch is set, when set to a ’0’ the latch is

reset. The Block Protect (BP0 and BP1) bits indi-

cate the extent of the protection employed. These

bits are set by the user issuing the WRSR instruc-

tion. These bits are non-volatile.

5/18

Share Link: