Electrical Characteristics
Table 13. i.MX51 Operating Ranges (continued)
Symbol
Parameter
Minimum1 Nominal2 Maximum1 Unit
NVCC_EMI
GPIO EMI Supply and additional digital power
1.65
1.875 or
3.1
V
NVCC_PER5
supplies.
2.775
NVCC_PER10
NVCC_PER11
NVCC_PER12
NVCC_PER13
NVCC_PER14
NVCC_IPUx3
GPIO IPU Supply and additional digital power
1.65
1.875 or
3.1
V
NVCC_PER3
supplies.
2.775
NVCC_PER8
NVCC_PER9
NVCC_EMI_DRAM DDR and Fuse Read Supply
1.65
1.8
1.95
V
VDD_FUSE4
Fusebox Program Supply (Write Only)
3.0
—
3.3
V
NVCC_NANDF_x5
Ultra High voltage I/O (UHVIO) supplies
—
V
NVCC_PER15
NVCC_PER17
UHVIO_L 1.65
1.875
1.95
UHVIO_H
2.5
2.775
3.1
UHVIO_UH
3.0
3.3
3.6
NVCC_USBPHY
NVCC_OSC
USB_PHY analog supply, oscillator analog
supply6
2.25
2.5
2.75
V
TVDAC_DHVDD,
TVE-to-DAC level shifter supply, cable detector
2.69
2.75
2.91
V
NVCC_TV_BACK, supply, analog power supply to RGB channel
AHVDDRGB
NVCC_HS4_1
NVCC_HS4_2
NVCC_HS6
NVCC_HS10
NVCC_I2C
HS-GPIO additional digital power supplies
I2C and HS-I2C I/O Supply7
1.65
—
3.1
V
1.65
1.875
1.95
V
2.7
3.0
3.3
NVCC_SRTC_
POW
SRTC Core and I/O Supply (LVIO)
1.1
1.2
1.3
V
VDDA33
USB PHY I/O analog supply
3.0
3.3
3.6
V
VBUS
See Table 11 and Table 126 for details. This is
—
—
—
—
not a power supply.
TC
Case Temperature (MCIMX51xD—Consumer)
–20
—
85
oC
Case Temperature (MCIMX51xC—Industrial)
–40
—
95
oC
1 Voltage at the package power supply contact must be maintained between the minimum and maximum voltages. The design
must allow for supply tolerances and system voltage drops.
2 The nominal values for the supplies indicate the target setpoint for a tolerance no tighter than ± 50 mV. Use of supplies with a
tighter tolerance allows reduction of the setpoint with commensurate power savings.
3 The NVCC_IPUx rails are isolated from one another. This allows the connection of different supply voltages for each one. For
example, NVCC_IPU2 can operate at 1.8 V while NVCC_IPU4 operates at 3.0 V.
i.MX51 Applications Processors for Consumer and Industrial Products, Rev. 6
20
Freescale Semiconductor