HMA510883 View Datasheet(PDF) - Intersil
Part Name
Description
Manufacturer
HMA510883 Datasheet PDF : 9 Pages
| |||
HMA510/883
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8.0V
Input or Output Voltage Applied . . . . . . . . G ND -0.5V to VCC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . 55oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W) θJC (oC/W)
CPGA Package . . . . . . . . . . . . . . . . . .
43
10
Maximum Package Power Dissipation at 125oC
CPGA Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.17W
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 175oC
Maximum Storage Temperature Range . . . . . . . . . . 65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4800 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of
the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
TABLE 1. HMA5lO/883 DC ELECTRICAL PERFORMANCE SPECIFICATIONS
Device Guaranteed and 100% Tested
PARAMETER
GROUP A
SYMBOL TEST CONDITIONS SUBGROUPS TEMPERATURE (oC) MIN
MAX UNITS
Logical One Input
Voltage
VlH
VCC = 5.5V
1, 2, 3
-55 ≤ TA ≤ 125
2.2
-
V
Logical Zero Input
Voltage
VIL
VCC = 4.5V
1, 2, 3
-55 ≤ TA ≤ 125
-
0.8
V
Output HIGH Voltage
Output LOW Voltage
Input Leakage Current
Output or I/O Leakage
Current
Standby Power Supply
Current
VOH
VOL
II
IO
ICCSB
IOH = -400µA
VCC = 4.5V (Note 2)
IOL = +4.0mA
VCC = 4.5V (Note 2)
VlN = VCC or GND
VOUT = VCC or GND,
VCC = 5.5V
VIN = VCC or GND,
VCC = 5.5V,
Outputs Open
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
-55 ≤ TA ≤ 125
2.6
-
V
-
0.4
V
-10
+10
µA
-10
+10
µA
-
500
µA
Operating Power Supply
Current
ICCOP
f = 1.0MHz, VIN = VCC
or GND VCC = 5.5V
(Note 3)
1, 2, 3
-55 ≤ TA ≤ 125
-
7.0
mA
Functional Test
FT
(Note 4)
7, 8
-55 ≤ TA ≤ 125
-
-
NOTES:
2. Interchanging of force and sense conditions is permitted.
3. Operating Supply Current a proportional to frequency, typical rating is 5mA/MHz.
4. Tested as follows: f = 1MHz, VIH (clock inputs) = 3.2V, VlH (all other inputs) = 2.6V, VIL = 0.4V, VOH ≥ 1.5V, and VOL ≤ 1.5V.
TABLE 2. HMA510/883 AC ELECTRICAL PERFORMANCE SPECIFICATIONS
Device Guaranteed and 100% Tested
-55
-65
-75
(NOTE 5)
GROUP A
PARAMETER SYMBOL CONDITIONS SUBGROUPS TEMPERATURE (oC) MIN MAX MIN MAX MIN MAX UNITS
Multiply Accumu- tMA
late Time
9, 10, 11
-55 ≤ TA ≤ 125
- 55 - 65 - 75 ns
Input Setup Time
tS
9, 10, 11
-55 ≤ TA ≤ 125
20 - 25 - 25 -
ns
3-13
|
|
Share Link: 