Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

HLMP-6620-E1210 View Datasheet(PDF) - Avago Technologies

Part NameHLMP-6620-E1210 AVAGO
Avago Technologies AVAGO
DescriptionSubminiature LED Lamps


HLMP-6620-E1210 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
HLMP-Pxxx Series, HLMP-Qxxx Series
HLMP-6xxx Series, HLMP-70xx Series
Subminiature LED Lamps
Data Sheet
Description
Flat Top Package
The HLMP-Pxxx Series flat top lamps use an untinted, non-
diffused, truncated lens to provide a wide radiation pat-
tern that is necessary for use in backlighting applications.
The flat top lamps are also ideal for use as emitters in light
pipe applications.
Dome Packages
The HLMP-6xxx Series dome lamps for use as indicators
use a tinted, diffused lens to provide a wide viewing angle
with a high on-off contrast ratio. High brightness lamps
use an untinted, nondiffused lens to provide a high lumi-
nous intensity within a narrow radiation pattern.
Resistor Lamps
The HLMP-6xxx Series 5 volt subminiature lamps with
built in current limiting resistors are for use in applications
where space is at a premium.
Lead Configurations
All of these devices are made by encapsulating LED chips
on axial lead frames to form molded epoxy subminiature
lamp packages. A variety of package configuration op-
tions is available. These include special surface mount
lead configurations, gull wing, yoke lead or Z-bend. Right
angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm
(0.200 inch) center spacing are available for through hole
mounting. For more information refer to Standard SMT
and Through Hole Lead Bend Options for Subminiature
LED Lamps data sheet.
Features
Subminiature flat top package
– ideal for backlighting and light piping applications
Subminiature dome package
– diffused dome for wide viewing angle
– nondiffused dome for high brightness
TTL and LSTTL compatible 5 volt resistor lamps
Available in six colors
Ideal for space limited applications
Axial leads
Available with lead configurations for surface mount
and through hole PC board mounting
Direct download click here
HOME 'HLMP-6620-E1210' Search

Description
Flat Top Package
The HLMP-Pxxx Series flat top lamps use an untinted, non diffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.

Features
 Subminiature flat top package
  – ideal for backlighting and light piping applications
 Subminiature dome package
  – diffused dome for wide viewing angle
  – nondiffused dome for high brightness
 TTL and LSTTL compatible 5 volt resistor lamps
 Available in six colors
 Ideal for space limited applications
 Axial leads
 Available with lead configurations for surface mount and through hole PC board mounting

 

Share Link : 

한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]