Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


HLMP-6620-F2210 View Datasheet(PDF) - Avago Technologies

Part NameHLMP-6620-F2210 AVAGO
Avago Technologies AVAGO
DescriptionSubminiature LED Lamps


HLMP-6620-F2210 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
High Performance Green
Device
HLMP-
Parameter
Symbol Min. Typ. Max. Units Test Conditions
P502-F00xx
1.0
3.0
P505-G00xx
6500-F00xx
1.6
6.3
1.0
7.0
IF = 10 mA
6505-L00xx
7040-D00xx
6800-G00xx
6820-F00xx
Luminous Intensity[1]
Iv
10.0 40.0
0.4
0.6
1.6
5.0
1.0
2.0
mcd
IF = 2 mA
VF = 5.0 Volts
All
Forward Voltage
VF
(Nonresistor Lamps)
2.1 2.7
V
IF = 10 mA
6800
Forward Current
IF
6820
(Resistor Lamps)
9.6 13.0 mA
3.5 5.0
VF = 5.0 V
All
P505
Reverse Breakdown Voltage VR
Included Angle Between
5.0
50.0
125
V
IR = 100 μA
6505
Half Intensity Points[2]
21/2
28
Deg.
All Diffused
90
Peak Wavelength
PEAK
565
nm
Dominant Wavelength[3]
d
569
nm
Spectral Line Half Width
1/2
28
nm
All
Speed of Response
s
500
ns
Capacitance
C
18
pF
VF = 0; f = 1 MHz
Thermal Resistance
RJ-PIN
170
°C/W Junction-to-Cathode Lead
Luminous Efficacy[4]
v
595
lm/W
Notes:
1. The luminous intensity for arrays is tested to assure a 2.1 to 1.0 matching between elements. The average luminous intensity for an array
determines its light output category bin. Arrays are binned for luminous intensity to allow Iv matching between arrays.
2. 1/2 is the off-axis angle where the luminous intensity is half the on-axis value.
3. Dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the single wavelength that defines the color of the
device.
4. Radiant intensity, Ie, in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in
candelas and v is the luminous efficacy in lumens/watt.
10
Direct download click here
HOME 'HLMP-6620-F2210' Search

Description
Flat Top Package
The HLMP-Pxxx Series flat top lamps use an untinted, non diffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.

Features
 Subminiature flat top package
  – ideal for backlighting and light piping applications
 Subminiature dome package
  – diffused dome for wide viewing angle
  – nondiffused dome for high brightness
 TTL and LSTTL compatible 5 volt resistor lamps
 Available in six colors
 Ideal for space limited applications
 Axial leads
 Available with lead configurations for surface mount and through hole PC board mounting

 

Share Link : 

한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]