HFA3824A
Absolute Maximum Ratings
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0V
Input, Output or I/O Voltage . . . . . . . . . . . . GND -0.5V to VCC +0.5V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2
Operating Conditions
Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.3V to +5.5V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
Thermal Information
Thermal Resistance (Typical, Note 12)
θJA (οC/W)
TQFP Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(Lead Tips Only)
Die Characteristics
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25,000 Gates
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
12. θJA is measured with the component mounted on an evaluation PC board in free air.
DC Electrical Specifications VCC = 3.3V to 5.5V TA = -40o to 85oC
PARAMETER
SYMBOL
TEST CONDITIONS
Power Supply Current
ICCOP
VCC = 3.5V, CLK Frequency 44MHz
(Notes 13, 14)
See previous DC table for remaining DC specifications
NOTES:
13. Output load 30pF. Add 8mA if RSSI Converter enabled.
14. Not tested, but characterized at initial design and major process/design changes.
MIN
TYP
MAX
UNITS
-
45
55
mA
AC Electrical Specifications VCC = 3.3V to 5.5V, TA = -40o to 85o, (Note 15)
44MHz
PARAMETER
SYMBOL
MIN
MAX
UNITS
CLK Period (MCLK)
CLK High (MCLK)
CLK Low (MCLK)
TXCLK, TXRDY, I, Q from MCLK
RXCLK, MD_RDY, RXD from MCLK
TEST 0-7, CCA, CAL_A/D, ANTSEL, TEST_CK from MCLK
See previous AC table for remaining AC specifications
tCP
22.5
-
ns
tCH
9
-
ns
tCL
9
-
ns
tD2
-
25
ns
tD3
-
25
ns
tD4
-
27
ns
NOTE:
15. AC tests performed with CL = 40pF, IOL = 2mA, and IOH = -1mA. Input reference level all inputs 1.5V. Test VIH = VCC, VIL = 0V;
VOH = VOL = VCC/2.
Test Circuit
DUT
(NOTE 17)
S1
CL
(NOTE 16)
IOH ± 1.5V
IOL
NOTES:
16. Includes Stray and JIG Capacitance
17. Switch S1 Open for ICCSB and ICCOP
EQUIVALENT CIRCUIT
FIGURE 21. TEST LOAD CIRCUIT
2-136