HIN235CP View Datasheet(PDF) - Harris Semiconductor
Part Name
Description
Manufacturer
HIN235CP Datasheet PDF : 14 Pages
| |||
HIN230 thru HIN241
Ordering Information
PART
NUMBER
HIN230CB
HIN230IB
HIN230BY
HIN231CB
HIN231IB
HIN231BY
HIN232CP
HIN232CB
HIN232IP
HIN232IJ
HIN232IB
HIN232MJ
HIN232BY
HIN233CP
HIN234CB
HIN234IB
HIN234BY
HIN235CP
HIN236CP
HIN236CB
HIN236IP
HIN236IB
TEMP.
RANGE (oC)
PACKAGE
0 to 70 20 Ld SOIC
-40 to 85 20 Ld SOIC
Die
0 to 70 16 Ld SOIC
-40 to 85 16 Ld SOIC
Die
0 to 70 16 Ld PDIP
0 to 70 16 Ld SOIC
-40 to 85 16 Ld PDIP
-40 to 85 16 Ld CERDIP
-40 to 85 16 Ld SOIC
-55 to 125 16 Ld CERDIP
Die
0 to 70 20 Ld PDIP
0 to 70 16 Ld SOIC
-40 to 85 16 Ld SOIC
Die
0 to 70 24 Ld PDIP
0 to 70 24 Ld PDIP
0 to 70 24 Ld SOIC
-40 to 85 24 Ld PDIP
-40 to 85 24 Ld SOIC
PKG. NO.
M20.3
M20.3
M16.3
M16.3
E16.3
M16.3
E16.3
F16.3
M16.3
F16.3
E20.3
M16.3
M16.3
E24.3
E24.3
M24.3
E24.3
M24.3
PART
NUMBER
HIN236BY
HIN237CP
HIN237CB
HIN237IP
HIN237IB
HIN237BY
HIN238CP
HIN238CB
HIN238IP
HIN238IB
HIN238BY
HIN239CB
HIN239IB
HIN239BY
HIN240CN
HIN240IN
HIN240BY
HIN241CB
HIN241IB
HIN241CA
HIN241IA
HIN241BY
TEMP.
RANGE (oC)
PACKAGE
Die
0 to 70 24 Ld PDIP
0 to 70 24 Ld SOIC
-40 to 85 24 Ld PDIP
-40 to 85 24 Ld SOIC
Die
0 to 70 24 Ld PDIP
0 to 70 24 Ld SOIC
-40 to 85 24 Ld PDIP
-40 to 85 24 Ld SOIC
Die
0 to 70 24 Ld SOIC
-40 to 85 24 Ld SOIC
Die
0 to 70 44 Ld MQFP
-40 to 85 44 Ld MQFP
Die
0 to 70 28 Ld SOIC
-40 to 85 28 Ld SOIC
0 to 70 28 Ld SSOP
-40 to 85 28 Ld SSOP
Die
PKG. NO.
E24.3
M24.3
E24.3
M24.3
E24.3
M24.3
E24.3
M24.3
M24.3
M24.3
Q44.10X10
Q44.10X10
M28.3
M28.3
M28.209
M28.209
Pin Descriptions
PIN
VCC
V+
V-
GND
C1+
C1-
C2+
C2-
TIN
TOUT
RIN
ROUT
EN
SD
NC
FUNCTION
Power Supply Input 5V ±10%. HIN233 and HIN235 5V ±5%.
Internally generated positive supply (+10V nominal), HIN231 and HIN239 requires +7.5V to +13.2V.
Internally generated negative supply (-10V nominal).
Ground lead. Connect to 0V.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to VCC is
connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally ±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected
to each input.
Receiver Outputs. These are TTL/CMOS levels.
Enable input. This is an active low input which enables the receiver outputs. With EN = 5V, the outputs are placed
in a high impedance state.
Shutdown Input. With SD = 5V, the charge pump is disabled, the receiver outputs are in a high impedance state and
the transmitters are shut off.
No Connect. No connections are made to these leads.
8-30
|
|
Share Link: 