HD74HC160 View Datasheet(PDF) - Renesas Electronics

Part Name

Description

Manufacturer

HD74HC160

Synchronous Decade Counter (Direct Clear)/Synchronous 4-bit Binary Counter (Direct Clear)/Synchronous Decade Counter (Synchronous Clear)/Synchronous 4-bit Binary Counter (Synchronous Clear)

Renesas Electronics 

HD74HC160/HD74HC161/HD74HC162/

HD74HC163

Synchronous Decade Counter (Direct Clear)

Synchronous 4-bit Binary Counter (Direct Clear)

Synchronous Decade Counter (Synchronous Clear)

Synchronous 4-bit Binary Counter (Synchronous Clear)

REJ03D0579-0200

(Previous ADE-205-455)

Rev.2.00

Oct 11, 2005

Description

The HD74HC160 and the HD74HC162 are 4 bit decade counters, and the HD74HC161 and the HD74HC163 are 4 bit

binary counters All flip-flops are clocked simultaneously on the low to high to transition (positive edge) of the clock

input waveform.

These counters may be preset using the load input. Presetting of all four flip-flops is synchronous to the rising edge of

clock. When load is held low counting is disabled and the data on the A, B, C, and D inputs is loaded into the counter

on the rising edge of clock. If the load input is taken high before the positive edge of clock the count operation will be

unaffected.

All of these counters may be cleared by the utilizing clear input. The clear function on the HD74HC162 and

HD74HC163 counters are synchronous to the clock. That is, the counters are cleared on the positive edge of clock

while the clear input is held low.

The HD74HC160 and HD74HC161 counters are cleared asynchronously. When the clear is taken low the counter is

cleared immediately regardless of the clock.

Two active high enable inputs Enable P and Enable T and a ripple carry output are provided to enable easy cascading of

counters. Both enable inputs must be high to count. The Enable T input also enables the Ripple Carry output. When

enabled, the Ripple Carry outputs a positive pulse when the counter overflows. This pulse is approximately equal in

duration to the high level portion of the QA outputs. The Ripple Carry output is fed to successive cascaded stages to

facilitate easy implementation of N-bit counters.

Features

• High Speed Operation: tpd (Clock to Q) = 18 ns typ (CL = 50 pF)

• High Output Current: Fanout of 10 LSTTL Loads

• Wide Operating Voltage: VCC = 2 to 6 V

• Low Input Current: 1 µA max

• Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)

Rev.2.00, Oct 11, 2005 page 1 of 14

Share Link: