Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part Name  

HD-0430M3-CH View Datasheet(PDF) - HIROSE ELECTRIC

Part NameHD-0430M3-CH Hirose
HIROSE ELECTRIC Hirose
Description3 dB 90° Card Couplers
HD-0430M3-CH Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
3 dB 90° Card Couplers
HD-M Series
HD-0053M3-IH
HD-0195M3-DH
HD-0195M3-DH-1 HD-0900M3-CH-1
HD-0620M3-EH HD-1700M3-FH
HD-3900M3-BH
HD-0313M3-FH
HD-2100M3-CH
HD-1800M3-CH
HD-3200M3-BH
HD-6150M3-AH
sFeatures
1.High Performance
The high frequency characteristics feature.
Extremely low loss and a high degree of matching.
2.Power Uniform Distribution and
90° Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90° phase difference between the two outputs (or
two inputs).
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the cover
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be extremely small and lightweight.
4.Equipped with Tabs
Tabs permit direct mounting to surface circuits.
5.High Power Type
This type can be used with up to 100 W of power.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
30 to 6400 MHz
50 ohms
50 to 100 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Insulation resistance 500M ohms min
Standard
2.Vibration
3.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
4.Temperature cycle No damage, cracks, or parts dislocation
5.Corrosion resistance No serious corrosion
6.Hydrogen sulfide gas No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
sMaterials
Conditions
100 V DC
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 980 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature : -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time : 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
Exposed to 20% salt water solution for 48 hours
Exposed to 10% potassium sulfide solution for 100 hours
Part
Cover (A)
Cover (B)
Board
Rivets
Eyelet
Tabs
Cover (A)
Cover (B)
Material
Stainless steel
Aluminum
Dielectric
Aluminum
Brass
Phosphor bronze
Stainless steel
Stainless steel
Finish
---------
Conductive white Alumite
Gold plating
---------
Nickel plating
Gold plating
---------
---------
27
Direct download click here

 

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]