DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

HCPL-0454-000E View Datasheet(PDF) - Avago Technologies

Part Name
Description
Manufacturer
HCPL-0454-000E
AVAGO
Avago Technologies AVAGO
HCPL-0454-000E Datasheet PDF : 19 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Regulatory Information
The devices contained in this data sheet have been approved by the following agencies:
Agency/Standard
Underwriters Laboratories (UL)
Recognized under UL1577,
Component Recognition Program,
Category FPQU2, File E55361
Canadian Standards Association (CSA)
File CA88324
UL1577
Component
Acceptance
Notice #5
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
HCPL-4504
3750 Vrms /
1 minute,
Option 020 5000
Vrms / 1 minute
3750 Vrms /
1 minute,
Option 020 5000
Vrms / 1 minute
Option 060
VIORM = 630 Vpeak
HCPL-J454
3750 Vrms /
1 minute
3750 Vrms /
1 minute
VIORM = 891
Vpeak
HCPL-0454
3750 Vrms /
1 minute
3750 Vrms /
1 minute
Option 060
VIORM = 560
Vpeak
HCNW4504
5000 Vrms /
1 minute
5000 Vrms /
1 minute
VIORM = 1414
Vpeak
Insulation and Safety Related Specifications
Value
Parameter
HCPL- HCPL-J454
HCPL-
J454
All other
Symbol 4504 -400E/-600E options
Minimum External L(101) 7.1
8.0
7.4
Air Gap
(External Clearance)
Minimum External L(102) 7.4
8.0
8.0
Tracking
(External Creepage)
HCPL-
0454
4.9
4.8
Minimum Internal
Plastic Gap
(Internal Clearance)
0.08
0.5
0.5
0.08
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance CTI
(Comparative
Tracking Index)
Isolation Group
NA
NA
≥175
≥175
IIIa
IIIa
NA
NA
≥175 ≥175
IIIa
IIIa
HCNW
4504
9.6
10.0
1.0
4.0
≥200
Units Conditions
mm Measured from input ter-
minals to output terminals,
shortest distance through air.
mm Measured from input ter-
minals to output terminals,
shortest distance path along
body.
mm Through insulation distance,
conductor to conductor,
usually the direct distance
between the photoemitter
and photodetector inside the
optocoupler cavity.
mm Measured from input ter-
minals to output terminals,
along internal cavity.
Volts DIN IEC 112/VDE 0303 Part 1
IIIa
Material Group (DIN VDE
0110, 1/89, Table 1)
All Avago data sheets report the creepage and clearance
inherent to the optocoupler component itself. These di-
mensions are needed as a starting point for the equip-
ment designer when determining the circuit insulation
requirements.
However, once mounted on a printed circuit board, mini-
mum creepage and clearance requirements must be
met as specified for individual equipment standards. For
creepage, the shortest distance path along the surface
of a printed circuit board between the solder fillets of
the input and output leads must be considered. There
are recommended techniques such as grooves and ribs
which may be used on a printed circuit board to achieve
desired creepage and clearances. Creepage and clear-
ance distances will also change depending on factors
such as pollution degree and insulation level.
8
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]