DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

6N135-300E View Datasheet(PDF) - Avago Technologies

Part Name
Description
Manufacturer
6N135-300E
AVAGO
Avago Technologies AVAGO
6N135-300E Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Recommended Pb-Free IR Profile
tp
Tp
TL 217 °C
* 260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
Tsmax
150 - 200 °C
Tsmin
ts
PREHEAT
tL
60 to 180 SEC.
25
t 25 °C to PEAK
TIME
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
15 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
NOTES:
THE TIME FROM 25 °C to PEAK
TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
NON-HALIDE FLUX SHOULD BE USED.
* RECOMMENDED PEAK TEMPERATURE FOR
WIDEBODY 400mils PACKAGE IS 245 °C
Regulatory Information
The devices contained in this data sheet have been approved by the following organizations:
UL
IEC/EN/DIN EN 60747-5-2
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice #5,
File CA 88324.
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01
(HCNW and Option 060 only)
Insulation and Safety Related Specifications
Parameter
Symbol
8-Pin DIP
(300 Mil) SO-8
Value
Value
Widebody
(400 Mil)
Value
Units      Conditions
Minimum External
L(101)
7.1
4.9
9.6
mm
Air Gap (External
Clearance)
Measured from input terminals
to output terminals, shortest
distance through air.
Minimum External
L(102)
7.4
4.8
10.0
mm
Tracking (External
Creepage)
Measured from input terminals
to output terminals, shortest
distance path along body.
Minimum Internal
0.08
0.08
1.0
mm
Plastic Gap
(Internal Clearance)
Through insulation distance,
conductor to conductor, usually
the direct distance between the
photoemitter and photodetector
inside the optocoupler cavity.
Minimum Internal
NA
NA
4.0
mm
Tracking (Internal
Creepage)
Measured from input terminals
to output terminals, along
internal cavity.
Tracking Resistance
CTI
(Comparative
Tracking Index)
200
200
200
Volts DIN IEC 112/VDE 0303 Part 1
Isolation Group
IIIa
IIIa
IIIa
Material Group
(DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
7
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]