DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

HCPL-0370-060E View Datasheet(PDF) - Avago Technologies

Part Name
Description
Manufacturer
HCPL-0370-060E
Avagotech
Avago Technologies Avagotech
HCPL-0370-060E Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Insulation and Safety Related Specifications
   
Parameter
Min.. External Air Gap
(External Clearance)
Min.. External Tracking
Path (External Creepage)
Min.. Internal Plastic
Gap (Internal Clearance)
Symbol
L(IO1)
L(IO2)
8-Pin DIP
(300 mil)
Value
7.1
7.4
0.08
Tracking Resistance
CTI
200
(Comparative
Tracking Index)
Isolation Group
SO-8
Value Units
4.9 mm
4.8 mm
0.08 mm
200 V
IIIa
Conditions
Measured from input terminals to output
terminals, hortest distance through air
Measured from input terminals to output
terminals, shortest distance path along body
Through insulation distance, conductor to
conductor, usually the direct distance between
the photoemitter and photodetector inside the
optocoupler cavity
DIN IEC 112/VDE 0303 PART 1
Material Group (DIN VDE 0110, 1/89, Table 1)
IEC/EN/DIN EN 60747-5-5 Insulation Related Characteristics [1] (with option 060)
Description
Symbol
HCPL-0370 HCPL-3700/3760 Units
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 V rms
for rated mains voltage ≤ 300 V rms
for rated mains voltage ≤ 600 V rms
I-IV
I-IV
I-IV
I-IV
I-III
I-III
Climatic Classification
55/85/21
55/85/21
Pollution Degree (DIN VDE 0110/1.89)
2
2
Maximum Working Insulation Voltage
VIORM
Input to Output Test Voltage, Method b
VPR
VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec
Partial Discharge < 5 pC
567
1063
630
1181
V peak
V peak
Input to Output Test Voltage, Method a
VPR
VIORM x 1.6 = VPR, Type and sample test, tm = 10 sec,
Partial Discharge < 5 pC
907
1008
V peak
Highest Allowable Overvoltage
(Transient Overvoltage, tini = 60 sec)
VIOTM
6000
6000
V peak
Safety Limiting Values
(Maximum values allowed in the event of a failure)
Case Temperature
Input Current [2]
Output Power [2]
TS
IS,INPUT
PS,OUTPUT
150
150
600
175
°C
230
mA
600
mW
Insulation Resistance at TS, VIO = 500 V
RS
109
109
W
Notes:
1. Insulation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits within the
application.
2. Safety-limiting parameters are dependent on case temperature. The Input Current, IS,INPUT, derates linearly above 25°C free-air case temperature
at a rate of 1.2 mA/°C and 1.53 mA/°C for HCPL-0370 and HCPL-3700/3760 respectively; the Output Power, P , S,OUTPUT derates linearly above 25°C
free-air case temperature at a rate of 4.8 mW/°C and 4 mW/°C for HCPL-0370 and HCPL-3700/3760 respectively.
6
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]