HCPL-0302-000 View Datasheet(PDF) - Avago Technologies
Part Name
Description
Manufacturer
HCPL-0302-000 Datasheet PDF : 15 Pages
| |||
HCPL-3020/HCPL-0302
0.4 Amp Output Current IGBT Gate Drive Optocoupler
Data Sheet
Description
The HCPL-3020 and HCPL-0302 consist of a GaAsP LED
optically coupled to an integrated circuit with a power
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications.The high operating voltage range of
the output stage provides the drive voltages required by
gate-controlled devices.The voltage and current supplied
by this optocoupler makes it ideally suited for directly driv-
ing small or medium power IGBTs. For IGBTs with higher
ratings, the HCPL-0314/3140 (0.6 A), HCPL‑3150 (0.6 A) or
HCPL-3120 (2.5 A) gate drive opto-couplers can be used.
Functional Diagram
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 VCC
7 N/C
6 VO
5 VEE
Truth Table
LED
VO
OFF
LOW
ON
HIGH
Features
• 0.4 A maximum peak output current
• 0.2 A minimum peak output current
• High speed response: 0.7 µs maximum propagation
delay over temperature range
• Ultra high CMR: minimum 10 kV/µs at VCM = 1000 V
• Bootstrappable supply current: maximum 3 mA
• Wide operating temperature range: –40°C to 100°C
• Wide VCC operating range: 10 V to 30 V over tempera-
ture range
• Available in DIP 8 and SO-8 packages
• Safety approvals: UL approval, 3750 VRMS for 1 minute
• CSA approval
• IEC/EN/DIN EN 60747-5-2 approval
VIORM = 630 VPEAK (HCPL-3020),
VIORM = 566 VPEAK (HCPL-0302)
Applications
• Isolated IGBT/power MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
• Air conditioner
• Washing machine
• Induction heater for cooker
• Switching power supplies (SPS)
Note:
A 0.1 uF bypass capacitor must be connected between pins VCC and VEE.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to pre-
vent damage and /or degradation which may be induced by ESD.
|
|
Share Link: 