H3CR-APE-300 View Datasheet(PDF) - OMRON Corporation
Part Name
Description
Manufacturer
H3CR-APE-300 Datasheet PDF : 22 Pages
| |||
I Accessories (Order Separately)
Flush Mounting Adapter
Name/specifications
Mounting Track
End Plate
Spacer
Protective Cover
Track Mounting/
Front Connecting Socket
Back Connecting Socket
Time Setting Ring
Panel Cover (see note 2)
Hold-down Clip (see note 3)
50 cm (l) x 7.3 mm (t)
1 m (l) x 7.3 mm (t)
1 m (l) x 16 mm (t)
8-pin
8-pin, finger safe type
11-pin
11-pin, finger safe type
8-pin
8-pin, finger safe type
11-pin
11-pin, finger safe type
Setting a specific time
Limiting the setting range
Light gray (5Y7/1)
Black (N1.5)
Medium gray (5Y5/1)
For PL08 and PL11 Sockets
For PF085A Socket
Models
Y92F-30
Y92F-73
Y92F-74
PFP-50N
PFP-100N
PFP-100N2
PFP-M
PFP-S
Y92A-48B
P2CF-08
P2CF-08-E
P2CF-11
P2CF-11-E
P3G-08
P3G-08 with Y92A-48G (see note 1)
P3GA-11
P3GA-11 with Y92A-48G (see note 1)
Y92S-27
Y92S-28
Y92P-48GL
Y92P-48GB
Y92P-48GM
Y92H-7
Y92H-8
Note: 1. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket.
2. The Time Setting Ring and Panel Cover are sold together.
3. Hold-down Clips are sold in sets of two.
Specifications
I General
Item
Operating mode
Pin type
Input type
Time-limit output type
Instantaneous output
type
Mounting method
Approved standards
H3CR-A/-AS
H3CR-AP
H3CR-A8/-A8S
H3CR-A8E
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
G: Signal ON/OFF-delay (Only for H3CR-A-300)
J: One-shot (Only for H3CR-A-300)
A: ON-delay (power supply start)
B2: Flicker ON start (power supply start)
E: Interval (power supply start)
J: One-shot (power supply start)
11-pin
8-pin
No-voltage input
Voltage input
---
H3CR-A/-A8/-AP:Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP universal)*
Relay output (SPDT)
---
Relay output (SPDT)
DIN track mounting, surface mounting, and flush mounting
UL508, CSA C22.2 No.14, NK, Lloyds
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1 for Timers with Contact Outputs.
Output category according to EN60947-5-2 for Timers with Transistor Outputs.
*The internal circuits are optically isolated from the output. This enables universal application as NPN or PNP transistor.
Solid-state Multi-functional Timer H3CR-A B-111
|
|
Share Link: 