H3CR-AE-301 View Datasheet(PDF) - OMRON Corporation

Part Name

Description

Manufacturer

H3CR-AE-301

Solid-state Multi-functional Timer

OMRON Corporation 

H3CR-AP

The start input of the H3CR-AP is voltage input. (Voltage imposition or open)

Voltage Inputs

No-contact Input

(Connection to PNP open

collector output sensor)

12 to 24 VDC

(sensor power supply)

Sensor

+ DC power

− supply

Timer

10 Power

supply (+)

6 Start

7 Input 0V

2 Power

supply

(−)

Operates with PNP transistor ON

No-contact Input

(Connection to NPN open

collector output sensor)

12 to 24 VDC

(sensor power supply)

Sensor

+ DC power

− supply

Timer

10 Power

supply (+)

6 Start

7 Input 0V

2 Power

supply

(−)

Operates with NPN transistor ON

Contact Input

Operates with relay ON

Timer

10 Power

supply (+)

6 Start

7 Input 0V

2 Power

supply

(−)

Note: The input circuit is isolated from the Note: Refer to the signal levels in the fol-

power supply circuit. Thus, an NPN

lowing table and be aware of the

transistor can be connected.

minimum applicable load of the relay.

Voltage Input Signal Levels

No-contact 1. Transistor ON

input

Residual voltage: 1 V max.

The voltage between terminals 6 and 7 must be 10.8 VDC min.

2. Transistor OFF

Leakage current: 0.01 mA max.

The voltage between terminals 6 and 7 must be 1.2 VDC max.

Contact

input

Use contacts that can adequately switch 0.1 mA at each oper-

ating voltage.

The voltage between terminals 6 and 7 with contacts ON or

OFF must satisfy the specified value.

Contacts ON

100-to-240-VAC and 100-to-125-VDC models: 85 to 264 VAC

or 85 to 137.5 VDC

24-to-48-VAC and 12-to-48-VDC models: 20.4 to 52.8 VAC or

10.8 to 52.8 VDC

Contacts OFF

100-to-240-VAC and 100-to-125-VDC models: 0 to 10 VAC or

0 to 10 VDC

24-to-48-VAC and 12-to-48-VDC models: 0 to 2.4 VAC or 0 to

1.2 VDC

Solid-state Multi-functional Timer H3CR-A B-119

Share Link: