Current rating 0.4A
Operating Temperature Range -55ç to +85ç Note 1. Storage Temperature Range -10ç to +60ç Note 2.
Voltage rating 100V AC Operating Humidity Range -40% to 80%
Storage Humidity Range 40% to 70%
1. Insulation Resistance 1000M ohms min
2. Withstanding voltage No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance 45m ohms max.
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle Contact resistance: 55m ohms max.: Insulation resistance: 100M ohms min. (-55ç: 30 minutes, 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes, 15 to 35ç: 2 to 3 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 55m ohms max.
8. Resistance to Soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note : The black dots on the insulater will not affect performance.
FX8 - 120 P - SV 1 (22)
q Series Name : FX8
w Number of Contacts :60, 80, 90, 120, 140
e Connector type
P : Header
t Product height variation None...Standard (Minimum low profile)
1 : +1mm
y Package Form
S : Receptacle
None : Tray package product
r Contact type SV : Board vertical type
(21) : Tube packaging product
(22) : Emboss tape package product
*The embossed tape packaging product is prepared for all number of contacts, except for 140 contacts.
qtwo-pieces Connection Product FX8 - 120/120 P 11 - SV 1 J
q Series Name :FX8
r Connector to Connector Pitch
w Number of Contacts: 60∞2, 80∞2, 90∞2, t Contact type :
SV...Board vertical type
100∞2, 120∞2, 140∞2 y Product height variationBlank:Standard (Minimum low profile)
Example: 120/120 = 240 contacts
1 : +1mm
e Connector Type : P : Header
u J: two-pieces connection product
S : Receptacle
*The standard delivery packaging of the two-piece connection product is the tray packaging.