FH12-10S-0.5SH54 View Datasheet(PDF) - HIROSE ELECTRIC

Part Name

Description

Manufacturer

FH12-10S-0.5SH54

0.5mm and 1mm Pitch Connectors For FPC/FFC

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC

qVertical Mounting Type (common for 0.5mm/1mm Pitch)

Operation

Precautions

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Verify that the actuator is positioned upright. If the

actuator has rotated to the side, carefully rotate it

upright.

Actuator upright

1) Avoid forcing the actuator up or down without the

FPC/FFC inserted.

2) Insert the FPC/FFC vertically in the connector slot

assuring that the conductive traces of the

FPC/FFC are facing away from the actuator.

Stiffener

FPC/FFC conductive traces

2) Do not insert the FPC/FFC diagonally.

Doing so will result in the corners of the FPC/FFC

catching on the contacts and will cause deforma-

tion of the contacts.

Slot

3) Press down the actuator in the direction shown.

2. FPC/FFC Removal

Rotate the actuator upward and withdraw the FPC/FFC.

®

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230

http://www.hirose.com

http://www.hirose-connectors.com

The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.

20

Share Link: