FH12-10S-0.5SH54 View Datasheet(PDF) - HIROSE ELECTRIC

Part Name

Description

Manufacturer

FH12-10S-0.5SH54

0.5mm and 1mm Pitch Connectors For FPC/FFC

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Series

Flip-lock

sFeatures

1. Ease of Use and Space Savings

Only one finger or 6.9N (Newtons) of force is required

to lock Hirose’s rotational actuator (flip-lock) as

compared to using 2 fingers and 39.2N to close a

FFC/FPC connector from our competition.

The Flip-Lock design also allows customers to place 2

or more connectors side by side as there is no need to

waste additional board space for a side latch.

2. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only 2.0mm height

above the board. A strengthened lock lever is available

which only requires an additional 0.4mm.

3. Supports Thin FPC (0.18mm)

Hirose does not require double-sided FPC to have any

additional strengthening plate or stiffener and can

therefore support a thickness of as little as 0.18mm +/-

0.05.

4. Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain

the required normal force without relying on the

connector housing. With our competitor’s conventional

products the housing walls support the contact force,

which does not provide for long-term reliability.

5. Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and

avoids solder bridging.

6. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical

Mount and offered in both a 0.5mm contact pitch as

well as a 1.0mm contact pitch (bottom contact only).

Rotating One-touch Mechanism

q

w

e

2010.9

1

Share Link: