FH12-10S-0.5SH54 View Datasheet(PDF) - HIROSE ELECTRIC

Part Name

Description

Manufacturer

FH12-10S-0.5SH54

0.5mm and 1mm Pitch Connectors For FPC/FFC

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC

qBottom Contact Type (common for 0.5mm/1mm Pitch)

Operation

Precautions

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1.

6) Partial insertion of the FPC/FFC, offset insertion, and

diagonal insertion will result in an unfavorable engage-

ment of the lock lever in which the lock lever is raised.

To correct this, first remove the FPC/FFC and then

reinsert it. Forcing the lock will damage the connector.

Stiffener

7) When locking, handle the FPC/FFC so that a load

is not applied to the FPC/FFC as would occur by

pulling the FPC/FFC, or lifting it, etc.

When a load is applied in the opposite direction to

the rotational movement of the lock, an excessive

load will be applied and this will cause connector

damage.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

8) At the time of lock operation, application of force

such as that indicated by the arrows in the dia-

grams below will cause the lock lever to disengage.

When the lock lever has become disengaged,

please exchange the entire connector.

18

Share Link: