FH12-10(8)SA-1SH View Datasheet(PDF) - HIROSE ELECTRIC
Part Name
Description
Manufacturer
FH12-10(8)SA-1SH Datasheet PDF : 20 Pages
| |||
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC
sProduct Specifications
Rating
Current rating: 0.5A DC(Note 1) Operating Temperature Range:_40 to +85ç (Note 2) Storage Temperature Range:_10 to +50ç (Note 3)
Voltage rating: 50V AC
Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
(Not dewed)
(Not dewed)
Applicable FPC
t=0.3±0.05 Gold plated
t=0.18 ± 0.05 for FH12F-*S-0.5SH
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Specification
500M ohms minimum
No flashover or insulation breakdown.
50m ohms maximum
100V DC
150V AC/1 minute
1mA
Conditions
4. Durability (Insertion/withdrawal)
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
20 cycles
5. Vibration
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
10 cycles
6. Shock
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 50m ohms maximum.
7. Humidity(Steady state) Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
96 hours at 40ç and humidity of 90% to 95%
8. Temperature Cycle
Contact resistance: 50m ohms maximum.
Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
Temperature: -40ç / 15 to 35ç / 85ç / 15 to 35ç,
Time: 30 / 2 to 3 / 30 / 2 to 3(minutes)
5 cycles
9.Resistance to Soldering heat No deformation of
components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350±10ç for 5 seconds
Note 1: When passing the current through all of the contacts,use 70% of the current rating.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
sMaterial
Part
Insulator
Actuator
Contact
Metal Fittings
Material
Polyamide, LCP(60 pos.)
PPS
Phosphor bronze
Brass
Finish
Color : Beige
Color : Dark brown
Gold plated
Tin plated
Remarks
UL94V-0
–––––––
sOrdering Information
FH 12 A - 10 (4) - S A - 0.5 SH (**)
q we
rt
yu
i
o
!0
q Series Name : FH
y Contact alignment: Single
w Series No.
: 12
u Eccentric direction:
e Blank : standard type
Blank : standard type
A : Top contact type
A : Eccentric type
S : Type with strengthed flip-lock actuator
i Contacts Pitch : 0.5mm, 1mm
F : Type with 0.18mm FPC End Thickness
o Contact type
r Standard type : Number of contacts
SH : SMT horizontal mounting type
Eccentric type : Number of contacts in 0.5mm housing SV : SMT vertical mounting type
t Standard type : Blank
!0 Plating specification
Eccentric type : Number of contacts
(54) : Selective gold plated
(55) : Gold plated
2
|
|
Share Link: 