FH12-10(4)SA-1SH View Datasheet(PDF) - HIROSE ELECTRIC

Part Name

Description

Manufacturer

FH12-10(4)SA-1SH

0.5mm and 1mm Pitch Connectors For FPC/FFC

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH12 Seriesq0.5mm and 1mm Pitch Connectors For FPC/FFC

qTop Contact Type

Operation

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Lift up the actuator. Use thumb or index finger.

Precautions

1) Avoid further lifting of the lock lever once the lock has been

released. Doing so will cause the lock lever to separate

from the rotational shaft, and the lock lever will become dis-

engaged or the hook portion of the connector body will be

damaged.

Lock lever

Rotational shaft

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

UP.

FPC insertion area

FPC/FFC conductive traces

2) Avoid further pressing of the lock portion from the

locked condition when the FPC/FFC has not yet

been inserted. Doing so will cause the lock lever to

become disengaged from the rotational shaft, and

the hook portion of the connector body will be

damaged.

Stiffener

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1 above.

3) Do not insert the FPC/FFC diagonally. Doing so will

result in the corners of the FPC/FFC catching on the

contacts and will cause deformation of the contacts.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

4) When closing down the actuator apply equal pres-

sure to both sides of the actuator.

19

Share Link: