EL5176 View Datasheet(PDF) - Intersil
Part Name
Description
Manufacturer
EL5176 Datasheet PDF : 11 Pages
| |||
®
Data Sheet
September 7, 2010
EL5176
FN7343.4
250MHz Differential Twisted-Pair Driver
The EL5176 is a high bandwidth amplifier with an output in
differential form. It is primarily targeted for applications such
as driving twisted-pair lines or any application where
common mode injection is likely to occur. The input signal
can be in either single-ended or differential form but the
output is always in differential form.
On the EL5176, two feedback inputs provide the user with
the ability to set the device gain (stable at minimum gain of
one).
The output common mode level is set by the reference pin
(REF), which has a -3dB bandwidth of over 50MHz.
Generally, this pin is grounded but it can be tied to any
voltage reference.
Both outputs (OUT+, OUT-) are short-circuit protected to
withstand temporary overload condition.
The EL5176 is available in the 10 Ld MSOP package and is
specified for operation over the full -40°C to +85°C
temperature range.
See also EL5171 (EL5176 in 8 Ld MSOP).
Ordering Information
PART
NUMBER
PART
MARKING
PACKAGE
PKG.
DWG. #
EL5176IYZ*
(Note)
BAAAC
10 Ld MSOP
M10.118A
(Pb-free) (3.0mm)
*Add “-T7” or “-T13” suffix for tape and reel. Please refer to TB347
for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• Fully differential inputs, outputs, and feedback
• 250MHz 3dB bandwidth
• 800V/µs slew rate
• Low distortion at 20MHz
• Single 5V or dual ±5V supplies
• 40mA maximum output current
• Low power - 8mA typical supply current
• Pb-free (RoHS compliant)
Applications
• Twisted-pair drivers
• Differential line drivers
• VGA over twisted-pair
• ADSL/HDSL drivers
• Single-ended to differential amplification
• Transmission of analog signals in a noisy environment
Pinout
EL5176
(10 LD MSOP)
TOP VIEW
FBP 1
IN+ 2
REF 3
+
-
IN- 4
FBN 5
10 OUT+
9 VS-
8 VS+
7 EN
6 OUT-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2005, 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
|
|
Share Link: 