EL2160C Datasheet PDF - Elantec -> Intersil

EL2160C View Datasheet(PDF) - Elantec -> Intersil

Part Name

Description

Manufacturer

EL2160C

180MHz Current Feedback Amplifier

Elantec -> Intersil

EL2160C Datasheet PDF : 18 Pages

1 2 3 4 5 6 7 8 9 10 Next Last

EL2160C

180MHz Current Feedback Amplifier

Features

• 130MHz 3dB bandwidth (AV=+2)

• 180MHz 3dB bandwidth (AV=+1)

• 0.01% differential gain, RL=500Ω

• 0.01° differential phase, RL=500Ω

• Low supply current, 8.5mA

• Wide supply range, ±2V to ±15V

• 80mA output current (peak)

• Low cost

• 1500V/µs slew rate

• Input common mode range to

within 1.5V of supplies

• 35ns settling time to 0.1%

Applications

• Video amplifiers

• Cable drivers

• RGB amplifiers

• Test equipment amplifiers

• Current to voltage converters

General Description

The EL2160C is a current feedback operational amplifier with -3dB

bandwidth of 130MHz at a gain of +2. Built using the Elantec propri-

etary monolithic complementary bipolar process, this amplifier uses

current mode feedback to achieve more bandwidth at a given gain than

a conventional voltage feedback operational amplifier.

The EL2160C is designed to drive a double terminated 75Ω coax

cable to video levels. Differential gain and phase are excellent when

driving both loads of 500Ω (<0.01%/<0.01°) and double terminated

75Ω cables (0.025%/0.1°).

The amplifier can operate on any supply voltage from 4V (±2V) to

33V (±16.5V), yet consume only 8.5mA at any supply voltage. Using

industry-standard pinouts, the EL2160C is available in 8-pin PDIP and

SO packages, as well as a 16-pin SO (0.300”) package. All are speci-

fied for operation over the full -40°C to +85°C temperature range. For

dual and quad applications, please see the EL2260C/EL2460C

datasheet.

Connection Diagrams

Ordering Information

Part No.

Package

Tape & Reel

EL2160CN

8-Pin PDIP

EL2160CS-T7

8-Pin SO

7”

EL2160CS-T13

8-Pin SO

13”

EL2160CM

16-Pin SO (0.300”)

EL2160CM-T13 16-Pin SO (0.300”)

13”

Outline#

MDP0031

MDP0027

NC 1

16 NC

NC 2

15 NC

-IN 3

NC 4

+IN 5

14 VS+

13 NC

12 OUT

NC 6

11 NC

VS- 7

10 NC

NC 8

9 NC

16-Pin SO (0.300”)

NC 1

8 NC

-IN 2

+IN 3

7 VS+

6 OUT

VS- 4

8-Pin PDIP/SO

5 NC

Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these

specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.

Share Link: