DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

UPD16311GC View Datasheet(PDF) - NEC => Renesas Technology

Part Name
Description
Manufacturer
UPD16311GC
NEC
NEC => Renesas Technology NEC
UPD16311GC Datasheet PDF : 20 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
PD16311
SW Data
The SW data is read by a read command, starting from the least significant bit. Bits 5 through 8 of the SW data
are 0.
MSB
LSB
0 0 0 0 b3 b2 b1 b0
SW1
SW2
SW3
SW4
Command
A command sets the display mode and status of the FIP driver.
The first 1 byte input to the PD16311 through the DIN pin after the STB pin has fallen is regarded as a command.
If STB is made high while a command/data is transmitted, serial communication is initialized, and the
command/data being transmitted is invalid (however, the command/data already transmitted remains valid).
(1) Display mode setting command
This command initializes the PD16311 and selects the number of segments and number of grids (1/8 to 1/16
duty, 12 segments to 20 segments).
When this command is executed, display is forcibly turned off, and key scanning is also stopped. To resume
display, a display ON command must be executed. If the same mode is selected, however, nothing is
performed.
MSB
LSB
0 0 − − b3 b2 b1 b0
Don't care
Selects display mode
0xxx : 8 digits, 20 segments
1000 : 9 digits, 19 segments
1001 : 10 digits, 18 segments
1010 : 11 digits, 17 segments
1011 : 12 digits, 16 segments
1100 : 13 digits, 15 segments
1101 : 14 digits, 14segments
1110 : 15 digits, 13 segments
1111 : 16 digits, 12 segments
On power application, the 16-digit, 12-segment mode is selected.
7
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]