DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

BU2092FV-E2 View Datasheet(PDF) - ROHM Semiconductor

Part Name
Description
Manufacturer
BU2092FV-E2
ROHM
ROHM Semiconductor ROHM
BU2092FV-E2 Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
BU2092F BU2092FV
Power Dissipation
Power dissipation(total loss) indicates the power that can be consumed by IC at TA=25°C(normal temperature). IC is heated
when it consumed power, and the temperature of IC chip becomes higher than ambient temperature. The temperature that
can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited.
Power dissipation is determined by the temperature allowed in IC chip(maximum junction temperature) and thermal
resistance of package(heat dissipation capability). The maximum junction temperature is typically equal to the maximum
value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead
frame of the package. The parameter which indicates this heat dissipation capability(hardness of heat release)is called
thermal resistance, represented by the symbol θJA (°C/W).The temperature of IC inside the package can be estimated by
this thermal resistance. Figure 7 shows the model of thermal resistance of the package. Thermal resistance θJA, ambient
temperature TA, maximum junction temperature TJmax, and power dissipation PD can be calculated by the equation below:
θJA = (TJmax - TA) / PD (°C/W)
Derating curve in Figure 8 indicates power that can be consumed by IC with reference to ambient temperature. Power that
can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at
certain ambient temperature. This gradient is determined by thermal resistance θJA. Thermal resistance θJA depends on
chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of
package is used. Thermal reduction curve indicates a reference value measured at a specified condition.
θJA =( TJmax - TA)/ PD (°C/W)
AmbienttemperTaatu[re] TA ()
Chip surfacetemperaTtuj r[e T] J()
Power dissipation PD (W)
消費電力 P [W]
Figure 7. Thermal resistance
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0
BU2092FV (SSOP-B20)
BU2092F (SOP18)
85
25 50 75 100 125
Ambient Temperature []
Figure 8. Derating Curve
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ2211115001
8/13
TSZ02201-0RHR1GZ00130-1-2
18.Sep.2015 Rev.002
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]