DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

BU2098F View Datasheet(PDF) - ROHM Semiconductor

Part Name
Description
Manufacturer
BU2098F
ROHM
ROHM Semiconductor ROHM
BU2098F Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
BU2098F, BU2090F, BU2090FS
Function
Start condition
The start condition is a “HIGH” to “LOW” transition of the SDA line while SCL is “HIGH”.
Stop condition
The stop condition is a “LOW” to “HIGH” transition of the SDA line while SCL is “HIGH”.
Technical Note
SDA
SCL
S
Start
condition
Fig.2 Start / Stop condition
P
Stop
condition
Acknowledge
The master (μp) puts a resistive “HIGH” level on the SDA line during the acknowledge clock pulse. The peripheral (audio
processor) that acknowledge has to pull-down (“LOW”) the SDA line during the acknowledge clock pulse, so that the SDA
line is stable “LOW” during this clock pulse.
The slave which has been addressed has to generate an acknowledgement after the reception of each byte, otherwise the
SDA line remains at the “HIGH” level during the ninth clock pulse time. In this case the master transmitter can generate the
STOP information in order to abort the transfer.
SCL
(from master)
SDA
(from master)
SDA
(from slave)
S
clock for acknowledge
1
8
9
not confirm
Fig.3 Acknowledge
confirm
ACK signal
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
6/12
2009.06 - Rev.A
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]