BTS7740G View Datasheet(PDF) - Infineon Technologies

Part Name

Description

Manufacturer

BTS7740G

Trilith IC

Infineon Technologies 

TrilithIC

BTS 7740 G

Data Sheet

1

Overview

1.1 Features

• Quad D-MOS switch driver

• Free configurable as bridge or quad-switch

• Optimized for DC motor management applications

• Low RDS ON: 110 mτ high-side switch, 100 mτ low-

side switch (typical values @ 25 C)

• Maximum peak current: typ. 8 A @ 25 C=

• Very low quiescent current: typ. 5 ←A @ 25 C=

• Small outline, enhanced power P-DSO-package

• Full short-circuit-protection

• Operates up to 40 V

• Status flag diagnosis

• Overtemperature shut down with hysteresis

• Internal clamp diodes

• Isolated sources for external current sensing

• Under-voltage detection with hysteresis

• PWM frequencies up to 1 kHz

P-DSO-28-14

Type

BTS 7740 G

Ordering Code

Q67007-A9374

Package

P-DSO-28-14

1.2 Description

The BTS 7740 G is part of the TrilithIC family containing three dies in one package:

One double high-side switch and two low-side switches. The drains of these three

vertical DMOS chips are mounted on separated leadframes. The sources are connected

to individual pins, so the BTS 7740 G can be used in H-bridge- as well as in any other

configuration. Both the double high-side and the two low-side switches of the

BTS 7740 G are manufactured in SMART SIPMOS® technology which combines low

RDS ON vertical DMOS power stages with CMOS control circuitry. The high-side switch is

fully protected and contains the control and diagnosis circuitry. Also the low-side

switches are fully protected, the equivalent standard product is the BSP 77.

In contrast to the BTS 7750 G, which consists of lower ohmic chips in the same

package, the BTS 7740 G offers a lower price for applications, which do not need the

high current capability of the BTS 7750 G or BTS 7750 GP.

Data Sheet

1

2001-02-01

Share Link: