DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

BTS6510 View Datasheet(PDF) - Infineon Technologies

Part Name
Description
Manufacturer
BTS6510
Infineon
Infineon Technologies Infineon
BTS6510 Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Data Sheet BTS6510
Thermal Characteristics
Parameter and Conditions
Symbol
Thermal resistance
chip - case:
junction - ambient (free air):
SMD version, device on PCB8):
Electrical Characteristics
RthJC7)
RthJA
Parameter and Conditions
at Tj = -40 ... +150 °C, Vbb = 12 V unless otherwise specified
Symbol
Values
Unit
min typ max
--
-- 0.75 K/W
-- 60
--
33
Values
Unit
min typ max
Load Switching Capabilities and Characteristics
On-state resistance (Tab to pins 1,2,6,7)
IL = 20 A, Tj = 25 °C:
VIN = 0, IL = 20 A, Tj = 150 °C:
IL = 90 A, Tj = 150 °C:
Vbb = 6V9), IL = 20 A, Tj = 150 °C:
Nominal load current10) (Tab to pins 1,2,6,7)
ISO 10483-1/6.7: VON = 0.5 V, Tc = 85 °C 11)
Nominal load current10), device on PCB8))
TA = 85 °C, Tj 150 °C VON 0.5 V,
Maximum load current in resistive range
(Tab to pins 1,2,6,7)
VON = 1.8 V, Tc = 25 °C:
see diagram on page 12
VON = 1.8 V, Tc = 150 °C:
Turn-on time12)
IIN to 90% VOUT:
Turn-off time
IIN to 10% VOUT:
RL = 1 , Tj =-40...+150°C
Slew rate on 12) (10 to 30% VOUT )
RL = 1 , TJ = 25 °C
Slew rate off 12) (70 to 40% VOUT )
RL = 1 , TJ = 25 °C
RON
RON(Static)
IL(ISO)
IL(NOM)
IL(Max)
ton
toff
dV/dton
-dV/dtoff
-- 4.4 6.0 m
7.9 10.5
-- 10.7
-- 10 17
55 70
-- A
13.6 17
-- A
250
--
--
150
--
-- A
150 230 470 µs
80 130 200
0.1 0.25 0.6 V/µs
0.15 0.35 0.6 V/µs
7) Thermal resistance RthCH case to heatsink (about 0.5 ... 0.9 K/W with silicone paste) not included!
8) Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70µm thick) copper area for Vbb
connection. PCB is vertical without blown air.
9) Decrease of Vbb below 10 V causes slowly a dynamic increase of RON to a higher value of RON(Static). As
long as VbIN > VbIN(u) max, RON increase is less than 10 % per second for TJ < 85 °C.
10) Not tested, specified by design.
11) TJ is about 105°C under these conditions.
12) See timing diagram on page 13.
Infineon Technologies AG
Page 3 of 15
2000-Mar-29
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]