BD6376GUL View Datasheet(PDF) - ROHM Semiconductor
Part Name
Description
Manufacturer
BD6376GUL Datasheet PDF : 18 Pages
| |||
BD6376GUL
Datasheet
Description of Blocks
1. Power-Saving Function
A power-saving function is included, which allows the system to save power when not driving the motor. The voltage
level on this pin should be set high so as to keep the operation mode. (See the Electrical Characteristics; p.4/14)
2. Motor Control Input: INA and INB Pins
Logic level controls the output logic of H-Bridge.
(See the Electrical Characteristics; p.4/14, and I/O Truth Table; p.7/14)
Absolute Maximum Ratings (Ta=25°C)
Parameter
Symbol
Limit
Unit
Power Supply Voltage
VCC
-0.3 to +4.5
V
Motor Power Supply Voltage
VM
-0.3 to +10.0
V
Control Input Voltage
VIN
-0.3 to +VCC+0.3
V
Power Dissipation
Pd
0.72 (Note 1)
W
H-bridge Output Current (DC)
IOUT
-1.0 to +1.0 (Note 2)
A
Storage Temperature Range
Tstg
-55 to +150
°C
Junction Temperature
Tjmax
150
°C
(Note 1) Reduced by 5.8mW/°C over 25°C, when mounted on a glass epoxy 8-layers board (50mm x 58mm x 1.75mm).
(Note 2) Must not exceed Pd, ASO, or Tjmax of 150°C.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Unit
Power Supply Voltage
Motor Power Supply Voltage
Control Input Voltage
Logic Input Frequency
Minimum Logic Input Pulse Width
Operating Temperature Range
VCC
2.5
-
3.6
V
VM
2.0
-
9.0
V
VIN
0
-
VCC
V
FIN
0
-
200
kHz
TIN
0.5
-
-
μs
Topr
-30
-
+85
°C
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 15 • 001
3/14
TSZ02201-0H3H0B600310-1-2
10.Feb.2016 Rev.003
|
|
Share Link: 