AZ734 View Datasheet(PDF) - American Zettler, Inc.
Part Name
Description
Manufacturer
AZ734 Datasheet PDF : 2 Pages
| |||
AZ734
DPST MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 4000 Vrms
• Low cost
• Epoxy sealed version available
• 5 Amp switching — double pole contacts
• UL Class B insulation system
• UL, CUR file E43203
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
Material
Resistance
DPST (2 Form A)
Resistive load:
Max. switched power: 150 W or 1200 VA
Max. switched current: 5 A
Max. switched voltage: 150* VDC or 380 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
5 A at 250 VAC general use, 100k cycles
5 A at 30 VDC resistive, 100k cycles
TV-3 at 125 VAC
Silver cadmium oxide, silver tin oxide
< 50 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
300 mW
1.5 W at 20°C (68°F) ambient
45°C (81°F) at nominal coil voltage
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
Operate Time (typical) 15 ms at nominal coil voltage
Release Time (typical) 10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms between open contacts
1000 Vrms between contact sets
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 130°C (266°F)
Vibration
0.062" DA at 10–55 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
13 grams
7/12/01W
|
|
Share Link: 