DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ADV7392BCPZ-REEL View Datasheet(PDF) - Analog Devices

Part Name
Description
Manufacturer
ADV7392BCPZ-REEL Datasheet PDF : 108 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Data Sheet
ADV7390/ADV7391/ADV7392/ADV7393
VIDEO PERFORMANCE SPECIFICATIONS
VDD = 1.8 V, PVDD = 1.8 V, VAA = 3.3 V, VDD_IO = 3.3 V, TA = +25°C.
Table 11.
Parameter
STATIC PERFORMANCE
Resolution
Integral Nonlinearity (INL)1
Differential Nonlinearity (DNL)1, 2
STANDARD DEFINTION (SD) MODE
Luminance Nonlinearity
Differential Gain
Differential Phase
Signal-to-Noise Ratio (SNR)3
ENHANCED DEFINITION (ED) MODE
Luma Bandwidth
Chroma Bandwidth
HIGH DEFINITION (HD) MODE
Luma Bandwidth
Chroma Bandwidth
Conditions
RSET = 510 Ω, RL = 37.5 Ω
RSET = 510 Ω, RL = 37.5 Ω
NTSC
NTSC
Luma ramp
Flat field full bandwidth
Min Typ Max Unit
10
Bits
0.5
LSBs
0.5
LSBs
0.5
±%
0.5
%
0.6
Degrees
58
dB
75
dB
12.5
MHz
5.8
MHz
30.0
MHz
13.75
MHz
1 Measured on DAC 1, DAC 2, and DAC 3.
2 Differential nonlinearity (DNL) measures the deviation of the actual DAC output voltage step from the ideal. For +ve DNL, the actual step value lies above the ideal
step value. For −ve DNL, the actual step value lies below the ideal step value.
3 Measured on the ADV7392/ADV7393 operating in 10-bit input mode.
POWER SPECIFICATIONS
VDD = 1.8 V, PVDD = 1.8 V, VAA = 3.3 V, VDD_IO = 3.3 V, TA = +25°C.
Table 12.
Parameter
NORMAL POWER MODE1, 2
IDD3
IDD_IO
IAA 5
IPLL
SLEEP MODE
IDD
IAA
IDD_IO
IPLL
Conditions
Min Typ Max Unit
SD (16× oversampling enabled), CVBS (only one DAC turned on)
SD (16× oversampling enabled), YPrPb (three DACs turned on)
ED (8× oversampling enabled)4
HD (4× oversampling enabled)4
One DAC enabled
All DACs enabled
33
mA
68
mA
59
mA
81
101 mA
1
10
mA
50
mA
122 151 mA
4
10
mA
5
µA
0.3
µA
0.2
µA
0.1
µA
1 RSET = 510 Ω (all DACs operating in full-drive mode).
2 75% color bar test pattern applied to pixel data pins.
3 IDD is the continuous current required to drive the digital core.
4 Applicable to both single data rate (SDR) and dual data rate (DDR) input modes.
5 IAA is the total current required to supply all DACs.
Rev. G | Page 11 of 108
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]