DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ADV7188BSTZ View Datasheet(PDF) - Analog Devices

Part Name
Description
Manufacturer
ADV7188BSTZ Datasheet PDF : 112 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADV7188
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
AVDD = 3.15 V to 3.45 V, DVDD = 1.65 V to 2.0 V, DVDDIO = 3.0 V to 3.6 V, PVDD = 1.71 V to 1.89 V, nominal input range 1.6 V.
Operating temperature range, unless otherwise noted.
Table 1.
Parameter
STATIC PERFORMANCE1, 2, 3
Resolution (Each ADC)
Integral Nonlinearity
Differential Nonlinearity
DIGITAL INPUTS
Input High Voltage4
Input Low Voltage5
Input Current6, 7
Input Capacitance8
DIGITAL OUTPUTS
Output High Voltage9
Output Low Voltage9
High Impedance Leakage Current
Output Capacitance8
POWER REQUIREMENTS8
Digital Core Power Supply
Digital Input/Output Power Supply
PLL Power Supply
Analog Power Supply
Digital Core Supply Current
Digital Input/Output Supply Current
PLL Supply Current
Analog Supply Current
Power-Down Current
Power-Up Time
Symbol
N
INL
DNL
VIH
VIL
IIN
CIN
VOH
VOL
ILEAK
COUT
DVDD
DVDDIO
PVDD
AVDD
IDVDD
IDVDDIO
IPVDD
IAVDD
IPWRDN
tPWRUP
Test Conditions
BSL at 54 MHz
BSL at 54 MHz
ISOURCE = 0.4 mA
ISINK = 3.2 mA
CVBS input10
SCART RGB FB input11
Min Typ
−1.5/+2.5
−0.7/+0.7
2
−50
−10
2.4
1.65 1.8
3.0 3.3
1.71 1.8
3.15 3.3
105
4
11
99
269
0.65
20
Max
Unit
12
Bits
±8
LSB
−0.99/+2.5 LSB
V
0.8
V
+50
μA
+10
μA
10
pF
V
0.4
V
10
μA
20
pF
2.0
V
3.6
V
1.89
V
3.45
V
mA
mA
mA
mA
mA
mA
ms
1 All ADC linearity tests performed with the input range at full scale − 12.5% and at zero scale + 12.5%.
2 Maximum INL and DNL specifications obtained with the part configured for component video input.
3 Temperature range TMIN to TMAX, −40°C to +85°C. The minimum/maximum specifications are guaranteed over this range.
4 To obtain specified VIH level on Pin 29, Register 0x13 (write only) must be programmed with Value 0x04. If Register 0x13 is programmed with Value 0x00, then VIH on Pin 29 is 1.2 V.
5 To obtain specified VIL level on Pin 29, Register 0x13 (write only) must be programmed with Value 0x04. If Register 0x13 is programmed with Value 0x00, then VIL on Pin 29 is 0.4 V.
6 Pins 36, 64, 79.
7 Excluding all TEST pins (TEST0 to TEST8)
8 VOH and VOL levels obtained using default drive strength value (0xD5) in Register 0xF4.
9 Guaranteed by characterization.
10 Only ADC0 is powered on.
11 All four ADCs powered on.
Rev. A | Page 5 of 112
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]