DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

ADV7181CBCPZ-REEL View Datasheet(PDF) - Analog Devices

Part Name
Description
Manufacturer
ADV7181CBCPZ-REEL Datasheet PDF : 20 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADV7181C
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
AVDD = 3.15 V to 3.45 V, DVDD = 1.65 V to 2.0 V, DVDDIO = 3.0 V to 3.6 V, PVDD = 1.71 V to 1.89 V, nominal input range 1.6 V.
TMIN to TMAX = −40°C to +85°C, unless otherwise noted.
Table 1.
Parameter1, 2
STATIC PERFORMANCE3, 4
Resolution (each ADC)
Integral Nonlinearity
Differential Nonlinearity
DIGITAL INPUTS5
Input High Voltage6
Input Low Voltage7
Input Current
Input Capacitance5
DIGITAL OUTPUTS
Output High Voltage8
Output Low Voltage8
High Impedance Leakage Current
Output Capacitance5
POWER REQUIREMENTS5
Digital Core Power Supply
Digital I/O Power Supply
PLL Power Supply
Analog Power Supply
Digital Core Supply Current
Digital I/O Supply Current
PLL Supply Current
Analog Supply Current9
Power-Down Current
Green Mode Power-Down
Power-Up Time
Symbol
Test Conditions
N
INL
BSL at 27 MHz (10-bit level)
BSL at 54 MHz (10-bit level)
BSL at 74 MHz (10-bit level)
BSL at 110 MHz (8-bit level)
DNL
At 27 MHz (10-bit level)
At 54 MHz (10-bit level)
At 74 MHz (10-bit level)
At 110 MHz (8-bit level)
VIH
HS_IN, VS_IN low trigger mode
VIL
HS_IN, VS_IN low trigger mode
IIN
CIN
VOH
ISOURCE = 0.4 mA
VOL
ISINK = 3.2 mA
ILEAK
Pin 1
All other output pins
COUT
DVDD
DVDDIO
PVDD
AVDD
IDVDD
IDVDDIO
IPVDD
IAVDD
IPWRDN
IPWRDNG
TPWRUP
CVBS input sampling at 54 MHz
Graphics RGB sampling at 110 MHz
SCART RGB FB sampling at 54 MHz
CVBS input sampling at 54 MHz
Graphics RGB sampling at 110 MHz
CVBS input sampling at 54 MHz
Graphics RGB sampling at 110 MHz
CVBS input sampling at 54 MHz
Graphics RGB sampling at 110 MHz
SCART RGB FB sampling at 54 MHz
Synchronization bypass function
Min Typ
Max
Unit
10
Bits
±0.6
±2.5
LSB
−0.6/+0.7
LSB
±1.4
LSB
±0.9
LSB
−0.2/+0.25 −0.99/+2.5 LSB
−0.2/+0.25
LSB
±0.9
LSB
−0.2/+1.5
LSB
2
V
0.7
V
0.8
V
0.3
V
−10
+10
μA
10
pF
2.4
V
0.4
V
60
μA
10
μA
20
pF
1.65 1.8
2
V
3.0 3.3
3.6
V
1.71 1.8
1.89
V
3.15 3.3
3.45
V
105
mA
113
mA
106
mA
4
mA
16
mA
11
mA
12
mA
99
mA
198
mA
269
mA
2.25
mA
16
mA
20
ms
1 The minimum/maximum specifications are guaranteed over this range.
2 All specifications are obtained using the Analog Devices, Inc., recommended programming scripts.
3 All ADC linearity tests performed at input range of full scale – 12.5%, and at zero scale + 12.5%.
4 Maximum INL and DNL specifications obtained with part configured for component video input.
5 Guaranteed by characterization.
6 To obtain specified VIH level on Pin 22, program Register 0x13 (WO) with a value of 0x04. If Register 0x13 is programmed with a value of 0x00, then VIH on Pin 22 is 1.2 V.
7 To obtain specified VIL level on Pin 22, program Register 0x13 (WO) with a value of 0x04. If Register 0x13 is programmed with a value of 0x00, then VIL on Pin 22 is 0.4 V.
8 VOH and VOL levels obtained using default drive strength value (0xD5) in Register Subaddress 0xF4.
9 For CVBS current measurement only, ADC0 is powered up. For RGB current measurements only, ADC0, ADC1, and ADC2 are powered up. For SCART FB current
measurements, all ADCs are powered up.
Rev. 0 | Page 4 of 20
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]