Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Номер в каталоге  

ADC0816 Просмотр технического описания (PDF) - National ->Texas Instruments

Номер в каталогеADC0816 National-Semiconductor
National ->Texas Instruments National-Semiconductor
Компоненты Описание8-Bit μP Compatible A/D Converters with 16-Channel Multiplexer
ADC0816 Datasheet PDF : 14 Pages
First Prev 11 12 13 14
FIGURE 13. Symmetrically Centered Reference
3.0 Converter Equations
The transition between adjacent codes N and N + 1 is given
The center of an output code N is given by:
The output code N for an arbitrary input are the integers within
the range:
where: VIN = Voltage at comparator input
VREF = Voltage at Ref(+)
VREF = Voltage at Ref(−)
VTUE = Total unadjusted error voltage (typically
VREF(+) ÷512)
4.0 Analog Comparator Inputs
The dynamic comparator input current is caused by the peri-
odic switching of on-chip stray capacitances These are con-
nected alternately to the output of the resistor ladder/switch
tree network and to the comparator input as part of the oper-
ation of the chopper stabilized comparator.
The average value of the comparator input current varies di-
rectly with clock frequency and with VIN as shown in Figure
If no filter capacitors are used at the analog or comparator
inputs and the signal source impedances are low, the com-
parator input current should not introduce converter errors, as
the transient created by the capacitance discharge will die out
before the comparator output is strobed.
If input filter capacitors are desired for noise reduction and
signal conditioning they will tend to average out the dynamic
comparator input current. It will then take on the characteris-
tics of a DC bias current whose effect can be predicted
conventionally. See AN-258 for further discussion.
Direct download click here


Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]