DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

AD9125-M5375-EBZ View Datasheet(PDF) - Analog Devices

Part Name
Description
Manufacturer
AD9125-M5375-EBZ Datasheet PDF : 56 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Dual, 16-Bit, 1000 MSPS,
TxDAC+ Digital-to-Analog Converter
AD9125
FEATURES
Flexible CMOS interface allows dual-word, word, or byte load
Single-carrier W-CDMA ACLR = 80 dBc at 122.88 MHz IF
Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω
Novel 2×/4×/8× interpolator/complex modulator allows
carrier placement anywhere in the DAC bandwidth
Gain and phase adjustment for sideband suppression
Multichip synchronization interface
High performance, low noise PLL clock multiplier
Digital inverse sinc filter
Low power: 900 mW at 500 MSPS, full operating conditions
72-lead, exposed paddle LFCSP
APPLICATIONS
Wireless infrastructure
W-CDMA, CDMA2000, TD-SCDMA, WiMAX, GSM, LTE
Digital high or low IF synthesis
Transmit diversity
Wideband communications: LMDS/MMDS, point-to-point
Cable modem termination systems
GENERAL DESCRIPTION
The AD9125 is a dual, 16-bit, high dynamic range TxDAC+®
digital-to-analog converter (DAC) that provides a sample rate of
1000 MSPS, permitting a multicarrier generation up to the Nyquist
frequency. It includes features optimized for direct conversion
transmit applications, including complex digital modulation,
and gain and offset compensation. The DAC outputs are optimized
to interface seamlessly with analog quadrature modulators, such
as the ADL537x F-MOD series from Analog Devices, Inc. A 4-wire
serial port interface allows programming/readback of many inter-
nal parameters. Full-scale output current can be programmed
over a range of 8.7 mA to 31.7 mA. The AD9125 comes in a
72-lead LFCSP.
PRODUCT HIGHLIGHTS
1. Ultralow noise and intermodulation distortion (IMD)
enable high quality synthesis of wideband signals from
baseband to high intermediate frequencies.
2. A proprietary DAC output switching technique enhances
dynamic performance.
3. The current outputs are easily configured for various
single-ended or differential circuit topologies.
4. The flexible CMOS digital interface allows the standard
32-wire bus to be reduced to a 16-wire bus.
TYPICAL SIGNAL CHAIN
COMPLEX BASEBAND
COMPLEX IF
RF
DC
fIF
DIGITAL
BASEBAND
PROCESSOR
2
SIN
COS
2
2/4
I DAC
2/4
Q DAC
NOTES
1. AQM = ANALOG QUADRATURE MODULATOR.
Figure 1.
LO – fIF
ANTIALIASING
FILTER
AQM PA
LO
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]