DatasheetQ Logo
Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

AD8205 View Datasheet(PDF) - Aavid Thermalloy, LLC

Part Name
Description
Manufacturer
AD8205 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
AD8205
EXTERNAL REFERENCE OUTPUT
Tying both pins together and to a reference produces an output
at the reference voltage when there is no differential input (see
Figure 16). The output moves down from the reference voltage
when the input is negative relative to the −IN pin and up when
the input is positive relative to the −IN pin.
+IN
–IN
AD8205
V+
OUT
VREF1
2.5V
VOLTAGE
REFERENCE
NC
NC = NO CONNECT
GND
VREF2
Figure 16. External Reference Output
SPLITTING THE SUPPLY
By tying one reference pin to V+ and the other to the ground
pin, the output is set at half of the supply when there is no
differential input (see Figure 17). The benefit is that no external
reference is required to offset the output for bidirectional
current measurement. This creates a midscale offset that is
ratiometric to the supply, which means that if the supply increases
or decreases, the output remains at half the supply. For example, if
the supply is 5.0 V, the output is at half scale or 2.5 V. If the supply
increases by 10% (to 5.5 V), the output goes to 2.75 V.
Data Sheet
+IN
–IN
AD8205
V+
OUT
VREF1
NC
NC = NO CONNECT
GND
VREF2
Figure 17. Split Supply
SPLITTING AN EXTERNAL REFERENCE
In this case, an external reference is divided by 2 with an
accuracy of approximately 0.5% by connecting one VREF pin to
ground and the other VREF pin to the reference (see Figure 18).
+IN
–IN
AD8205
V+
OUT
VREF1
5V
VOLTAGE
REFERENCE
NC
NC = NO CONNECT
GND
VREF2
Figure 18. Split External Reference
Rev.D | Page 10 of 12
 

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]