Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


GS881Z32BT View Datasheet(PDF) - Giga Semiconductor

Part NameGS881Z32BT GSI
Giga Semiconductor GSI
Description9Mb Pipelined and Flow Through Synchronous NBT SRAM
GS881Z32BT Datasheet PDF : 39 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
GS881Z18B(T/D)/GS881Z32B(T/D)/GS881Z36B(T/D)
Burst Cycles
Although NBT RAMs are designed to sustain 100% bus bandwidth by eliminating turnaround cycle when there is transition from
read to write, multiple back-to-back reads or writes may also be performed. NBT SRAMs provide an on-chip burst address
generator that can be utilized, if desired, to further simplify burst read or write implementations. The ADV control pin, when
driven high, commands the SRAM to advance the internal address counter and use the counter generated address to read or write
the SRAM. The starting address for the first cycle in a burst cycle series is loaded into the SRAM by driving the ADV pin low, into
Load mode.
Burst Order
The burst address counter wraps around to its initial state after four addresses (the loaded address and three more) have been
accessed. The burst sequence is determined by the state of the Linear Burst Order pin (LBO). When this pin is low, a linear burst
sequence is selected. When the RAM is installed with the LBO pin tied high, Interleaved burst sequence is selected. See the tables
below for details.
Mode Pin Functions
Mode Name
Pin Name State
Function
Burst Order Control
L
LBO
H
Linear Burst
Interleaved Burst
Output Register Control
L
FT
H or NC
Flow Through
Pipeline
Power Down Control
L or NC
ZZ
H
Active
Standby, IDD = ISB
Note:
There is a pull-up device on the FT pin and a pull-down device on the ZZ pin, so this input pin can be unconnected and the chip will operate
in the default states as specified in the above tables.
Burst Counter Sequences
Linear Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
00
01
10
11
2nd address
01
10
11
00
3rd address
10
11
00
01
4th address
11
00
01
10
Note:
The burst counter wraps to initial state on the 5th clock.
Interleaved Burst Sequence
A[1:0] A[1:0] A[1:0] A[1:0]
1st address
00
01
10
11
2nd address
01
00
11
10
3rd address
10
11
00
01
4th address
11
10
01
00
Note:
The burst counter wraps to initial state on the 5th clock.
BPR 1999.05.18
Rev: 1.04 10/2004
16/39
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2002, GSI Technology
Direct download click here
 
Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2018  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]