M1A3P400-2PQG208Y View Datasheet(PDF) - Microsemi Corporation

Part Name

Description

Manufacturer

M1A3P400-2PQG208Y

(A3Pxxx) ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

Microsemi Corporation 

Revision

Advance v0.3

Advance v0.2

ProASIC3 Flash Family FPGAs

Changes

Page

The "PLL Macro" section was updated. EXTFB information was removed from

this section.

2-15

The CCC Output Peak-to-Peak Period Jitter FCCC_OUT was updated in Table 2-

11 • ProASIC3 CCC/PLL Specification

2-29

EXTFB was removed from Figure 2-27 • CCC/PLL Macro.

2-28

Table 2-13 • ProASIC3 I/O Features was updated.

2-30

The "Hot-Swap Support" section was updated.

2-33

The "Cold-Sparing Support" section was updated.

2-34

"Electrostatic Discharge (ESD) Protection" section was updated.

2-35

The LVPECL specification in Table 2-43 • I/O Hot-Swap and 5 V Input Tolerance

Capabilities in ProASIC3 Devices was updated.

2-64

In the Bank 1 area of Figure 2-72, VMV2 was changed to VMV1 and VCCIB2 was

changed to VCCIB1.

The VJTAG and I/O pin descriptions were updated in the "Pin Descriptions"

section.

2-97

2-50

The "JTAG Pins" section was updated.

2-51

"128-Bit AES Decryption" section was updated to include M7 device information. 2-53

Table 3-6 was updated.

3-6

Table 3-7 was updated.

3-6

In Table 3-11, PAC4 was updated.

3-93-8

Table 3-20 was updated.

3-20

The note in Table 3-32 was updated.

3-27

All Timing Characteristics tables were updated from LVTTL to Register Delays

3-31 to 3-

73

The Timing Characteristics for RAM4K9, RAM512X18, and FIFO were updated.

3-85 to

3-90

FTCKMAX was updated in Table 3-110.

Figure 2-11 was updated.

3-97

2-9

The "Clock Resources (VersaNets)" section was updated.

2-9

The "VersaNet Global Networks and Spine Access" section was updated.

2-9

The "PLL Macro" section was updated.

2-15

Figure 2-27 was updated.

2-28

Figure 2-20 was updated.

2-19

Table 2-5 was updated.

2-25

Table 2-6 was updated.

2-25

The "FIFO Flag Usage Considerations" section was updated.

2-27

Table 2-13 was updated.

2-30

Figure 2-24 was updated.

2-31

The "Cold-Sparing Support" section is new.

2-34

Revision 13

5- 11

Share Link: