M1A3P400-2FG484ES View Datasheet(PDF) - Microsemi Corporation
Part Name
Description
Manufacturer
M1A3P400-2FG484ES
Microsemi Corporation
M1A3P400-2FG484ES Datasheet PDF : 220 Pages
| |||
Revision
Advance v0.6
(continued)
ProASIC3 Flash Family FPGAs
Changes
The "RESET" section was updated.
The "WCLK and RCLK" section was updated.
The "RESET" section was updated.
The "RESET" section was updated.
The "Introduction" of the "Advanced I/Os" section was updated.
The "I/O Banks" section is new. This section explains the following types of I/Os:
Advanced
Standard+
Standard
Table 2-12 • Automotive ProASIC3 Bank Types Definition and Differences is
new. This table describes the standards listed above.
PCI-X 3.3 V was added to the Compatible Standards for 3.3 V in Table 2-
11 • VCCI Voltages and Compatible Standards
Table 2-13 • ProASIC3 I/O Features was updated.
The "Double Data Rate (DDR) Support" section was updated to include
information concerning implementation of the feature.
The "Electrostatic Discharge (ESD) Protection" section was updated to include
testing information.
Level 3 and 4 descriptions were updated in Table 2-43 • I/O Hot-Swap and 5 V
Input Tolerance Capabilities in ProASIC3 Devices.
The notes in Table 2-43 • I/O Hot-Swap and 5 V Input Tolerance Capabilities in
ProASIC3 Devices were updated.
The "Simultaneous Switching Outputs (SSOs) and Printed Circuit Board Layout"
section is new.
A footnote was added to Table 2-14 • Maximum I/O Frequency for Single-Ended
and Differential I/Os in All Banks in Automotive ProASIC3 Devices (maximum
drive strength and high slew selected).
Table 2-18 • Automotive ProASIC3 I/O Attributes vs. I/O Standard Applications
Table 2-50 • ProASIC3 Output Drive (OUT_DRIVE) for Standard I/O Bank Type
(A3P030 device)
Table 2-51 • ProASIC3 Output Drive for Standard+ I/O Bank Type was updated.
Table 2-54 • ProASIC3 Output Drive for Advanced I/O Bank Type was updated.
The "x" was updated in the "User I/O Naming Convention" section.
The "VCC Core Supply Voltage" pin description was updated.
The "VMVx I/O Supply Voltage (quiet)" pin description was updated to include
information concerning leaving the pin unconnected.
The "VJTAG JTAG Supply Voltage" pin description was updated.
The "VPUMP Programming Supply Voltage" pin description was updated to
include information on what happens when the pin is tied to ground.
The "I/O User Input/Output" pin description was updated to include information on
what happens when the pin is unused.
The "JTAG Pins" section was updated to include information on what happens
when the pin is unused.
Page
2-25
2-25
2-25
2-27
2-28
2-29
2-29
2-30
2-32
2-35
2-64
2-64
2-41
2-30
2-45
2-83
2-84
2-84
2-48
2-50
2-50
2-50
2-50
2-50
2-51
Revision 13
5-9
|
|
Share Link: