M1A3P600-1PQG208YES View Datasheet(PDF) - Microsemi Corporation

Part Name

Description

Manufacturer

M1A3P600-1PQG208YES

(A3Pxxx) ProASIC3 Flash Family FPGAs with Optional Soft ARM Support

Microsemi Corporation 

ProASIC3 DC and Switching Characteristics

Table 2-2 • Recommended Operating Conditions 1,2

Symbol

Parameters 1

Commercial

Industrial Units

TA

TJ

VCC3

Ambient temperature

Junction temperature

1.5 V DC core supply voltage

0 to +70

-40 to +85

°C

0 to 85

-40 to 100

°C

1.425 to 1.575 1.425 to 1.575 V

VJTAG

VPUMP

JTAG DC voltage

Programming voltage

Programming Mode 4

Operation 5

1.4 to 3.6

3.15 to 3.45

0 to 3.6

1.4 to 3.6

V

3.15 to 3.45

V

0 to 3.6

V

VCCPLL

Analog power supply (PLL)

1.425 to 1.575 1.425 to 1.575 V

VCCI and VMV 6 1.5 V DC supply voltage

1.425 to 1.575 1.425 to 1.575 V

1.8 V DC supply voltage

1.7 to 1.9

1.7 to 1.9

V

2.5 V DC supply voltage

2.3 to 2.7

2.3 to 2.7

V

3.3 V DC supply voltage

3.3 V wide range DC supply voltage 7

3.0 to 3.6

2.7 to 3.6

3.0 to 3.6

V

2.7 to 3.6

V

LVDS/B-LVDS/M-LVDS differential I/O

2.375 to 2.625 2.375 to 2.625 V

LVPECL differential I/O

3.0 to 3.6

3.0 to 3.6

V

Notes:

1. All parameters representing voltages are measured with respect to GND unless otherwise specified.

2. To ensure targeted reliability standards are met across ambient and junction operating temperatures, Microsemi

recommends that the user follow best design practices using Microsemi’s timing and power simulation tools.

3. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each I/O

standard are given in Table 2-18 on page 2-18.

4. The programming temperature range supported is Tambient = 0°C to 85°C.

5. VPUMP can be left floating during operation (not programming mode).

6. VMV and VCCI should be at the same voltage within a given I/O bank. VMV pins must be connected to the

corresponding VCCI pins. See the "VMVx I/O Supply Voltage (quiet)" section on page 3-1 for further information.

7. 3.3 V wide range is compliant to the JESD8-B specification and supports 3.0 V VCCI operation.

Table 2-3 • Flash Programming Limits – Retention, Storage and Operating Temperature1

Product

Grade

Commercial

Programming Program Retention Maximum Storage

Maximum Operating

Cycles

(biased/unbiased) Temperature TSTG (°C) 2 Junction Temperature TJ (°C) 2

500

20 years

110

100

Industrial

500

20 years

110

100

Notes:

1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.

2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device operating

conditions and absolute limits.

2-2

Revision 13

Share Link: